5. 6K/4K Photo and Drive Settings136A stop motion picture is created by splicing pictures together.1 Set the drive mode dial to [ ].2 Display the setup screen. (P134)• Switch to [Stop Motion Animation] if it is not selected.(P134)3 Press the shutter button halfway to exit the menu.• The recording screen will be displayed. You can alsoperform the same operation by pressing [ ] until therecording screen is displayed.• This function is not for use in a security camera.• [Time Lapse Shot] is paused in the following cases.– When the charge on the battery runs out– Turning the camera offDuring [Time Lapse Shot], you can replace the battery and the card, and then restart byturning on this unit. (Note that pictures taken after the restart will be saved as a separate set ofgroup pictures) Turn off this unit when replacing the battery.• When [Shooting Interval] is set to a longer value, if the camera turns off automatically whilewaiting for the next recording, we recommend that you use Time Lapse Shot in Auto FocusMode.Not available in these cases:• This function is not available in the following cases:– When using [Multi Exp.]Creating Stop Motion Pictures ([Stop Motion Animation])[Auto Shooting] [ON] Takes pictures automatically at a set recording interval.[OFF] This is for taking pictures manually, frame by frame.[Shooting Interval](Only when [Auto Shooting] is set to [ON])2/1: Select the item (second)3/4: Setting[MENU/SET]: SetAFSAFSL4:3
