11. Connecting to other equipment318∫ Print SettingsSelect and set the items both on the screen in step 2 of the “Selecting a single picture andprinting it” and in step 3 of the “Selecting multiple pictures and printing them” procedures.• When you want to print pictures on a paper size or a layout which is not supported by thecamera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout onthe printer.(For details, refer to the operating instructions of the printer.)• If the printer does not support date printing, the date cannot be printed on the picture.• Depending on the printer, the date print settings of the printer may take precedence so check ifthis is the case.[Print with Date] Sets date printing.[Num.of prints] Sets the number of pictures to be printed (up to 999 pictures).[Paper Size] Sets the paper size.[Page Layout] Sets whether or not to add borders and how many pictures to beprinted on each sheet of paper.• The camera is receiving an error message from the printer when the [¥] indication lightsyellow during printing. After finishing printing, make sure there are no problems with theprinter.• If the number of prints is high, the pictures may be printed several times. In this case, theremaining number of prints indicated may differ from the number set.• Only pictures taken in JPEG format can be printed. Those taken in RAW will use the JPEGpictures that were simultaneously created. If an equivalent JPEG picture is not available, noprint will take place.
