472. Getting Started/Basic Operations∫ Setting the operation methods of the front dial and rear dialRotating the control dial:Selection of items or setting of values etc., is performed.• The operation of rotating the control dial is illustrated as below inthis owner’s manual.Example: When rotating the control dial to the left or right:> [Custom] > [Operation] > [Dial Set.][Assign Dial (F/SS)]Assigns the operations of the aperture value and shutter speedin Manual Exposure Mode.[ F SS]:Assigns the aperture value to the front dial, and the shutterspeed to the rear dial.[ SS F]:Assigns the shutter speed to the front dial, and the aperturevalue to the rear dial.[Rotation (F/SS)]Changes the rotation direction of the dials for adjusting theaperture value and shutter speed.[ ]/[ ][Exposure Comp.]Assigns the Exposure Compensation to the front dial or reardial so that you can directly adjust it.[ ] (Front Dial)/[ ] (Rear Dial)/[OFF][Dial Operation SwitchSetup]Sets the items to be assigned temporarily to the front/rear dialswhen you press the function button to which [Dial OperationSwitch] is assigned.[ ] ([Front Dial Operation])/[ ] ([Rear Dial Operation])• Items that can be set are as follows.– [Photo Style] (P208)– [Filter Effect] (P78, 210)– [Aspect Ratio] (P205)– [AF Mode] (P91)– [6K/4K PHOTO] (P116)– [Highlight Shadow] (P212)– [i.Dynamic] (P213)– [i.Resolution] (P213)– [Flash Mode] (P156)– [Flash Adjust.] (P158)– [Sensitivity] (P107)– [White Balance] (P109)• [Highlight Shadow] uses the two dials.Control DialMENU
