27910. Using the Wi-Fi/Bluetooth functionThe camera detects the connection between the smartphone and wireless access pointand backs up images stored on the camera to a preset Cloud Storage.• Check the “FAQ/Contact us” on the following site for compatible Cloud Storage.http://lumixclub.panasonic.net/eng/c/lumix_faqs/1 The smartphone automatically connects to the wireless access point.2 Start up the “Image App” in foreground (a state in which the app can be operated).3 The camera automatically turns on.4 The camera automatically connects to the wireless access point connected in step 1.5 Images on the camera are automatically backed up to a Cloud Storage via "LUMIXCLUB".Once the setup procedure below is completed, you can back up data to a cloudstorage service just by performing step 2.• Refer to the operating instructions of your smartphone for more information on how to set up aconnection automatically in step 1.∫ Registering the wireless access point you want to use to the camera (Setup 1)• If you have connected the camera to the wireless access point you want to use before, theprocedure below is not required.1 Select the camera’s menu. (P55)2 Select [New connection].3 Connect to the wireless access point.• Refer to the connection methods described on P300 to connect the camera to the wirelessaccess point.Backing up images to a Cloud Storage automatically (Auto CloudBackup)Wireless connectivity required:A Wireless access point B Cloud StorageSetting up Auto Cloud Backup> [Setup] > [Bluetooth] > [Wi-Fi network settings]Wi-FiBluetooth BluetoothWi-FiWi-FiLUMIX CLUBMENU
