30911. Connecting to other equipmentPreparations:Set the [VIERA Link] to [ON]. (P239)1 Connect this unit to a Panasonic TV compatible with VIERA Link withan HDMI cable (P308).2 Turn the camera on and then press [(].3 Operate with the remote control for the TV.Turning this unit off:If you use the remote control for the TV to turn the TV off, this unit is also turned off.Automatic input switching:• If you connect with an HDMI cable and then turn this unit on, and then press [(], the inputchannel on the TV automatically switches to this unit’s screen. If the TV’s power is in standbystatus, it will turn on automatically (if [Set] has been selected for the TV’s [Power on link]setting).The recorded pictures can be played back on a TV with an SD Memory Cardslot• Depending on the TV model, pictures may not be displayed on the full screen.• The file format of the motion pictures that can be played back differs depending on the TVmodel.• For cards compatible with playback, refer to the operating instructions of the TV.Using VIERA Link (HDMI)What is the VIERA Link (HDMI) (HDAVI Control™)?• This function allows you to use your remote control for the Panasonic TV for easy operationswhen this unit has been connected to a VIERA Link compatible device using an HDMI cablefor automatic linked operations.(Not all operations are possible.)• VIERA Link is a unique Panasonic function built on an HDMI control function using thestandard HDMI CEC (Consumer Electronics Control) specification.Linked operations with HDMI CEC compatible devices made by other companies are notguaranteed. When using devices made by other companies that are compatible withVIERA Link, refer to the operating instructions for the respective devices.• This unit supports “VIERA Link Ver.5” function. “VIERA Link Ver.5” is the standard forPanasonic’s VIERA Link compatible equipment. This standard is compatible with Panasonic’sconventional VIERA Link equipment.• Operation using the buttons on this unit will be limited.• To play back the sound of a film during a slide show, set [Sound] to [AUTO] or [Audio] on theSlide Show setting screen.• Use a “High Speed HDMI cable” with the HDMI logo.Cables that do not comply with the HDMI standards will not work.“High Speed HDMI cable” (Type A–Type A plug, up to 1.5 m (4.9 feet) long)
