1697. Recording Motion PicturesApplicable modes:This unit automatically records time code during motionpicture recording.• Time codes are not recorded on motion pictures recorded whenthe [Rec Format] is set to [MP4].Setting the recording method of time code> [Motion Picture] > [Time Code][Time CodeDisplay]Set whether or not the time code is displayed on the recording screen/playback screen.[Count Up]Sets the time code count method.[REC RUN]:Counts the time code only when recording motion pictures.[FREE RUN]:Counts the time code even when not recording (including when this unit isturned off).• The setting is fixed to [REC RUN] in the following cases.– When [Variable Frame Rate] is set[Time CodeValue]Sets the start point (starting time) for the time code.[Reset]:Sets to 00:00:00:00 (hour: minute: second: frame)[Manual Input]:Manually input hour, minute, second and frame.[Current Time]:Sets hour, minute and second to current time and sets frame to 00.[Time CodeMode]Sets the time code recording method.[DF] (Drop Frame):The camera modifies the difference between recorded time and time code.• Seconds and frames are separated by “.”. (Example: 00:00:00.00)[NDF] (Non-Drop Frame):Records the time code without drop frame.• Seconds and frames are separated by “:”. (Example: 00:00:00:00)• The setting is fixed to [NDF] in the following cases.– When [System Frequency] is set to [50.00Hz (PAL)] or [24.00Hz(CINEMA)]– When the motion picture frame rate is set to [24p] in [Rec Quality][HDMI TimeCode Output]Generates time code for images output through HDMI.• [HDMI Time Code Output] can only be set in Creative Video Mode.• When using the HDMI output and outputting videos that do not include timecodes (e.g., when [Rec Format] is set to [MP4]), a time code will not beoutput.• The device screen may go dark depending on the connected device.TC 00:01:30:00TC 00:01:30:00MENU
