10. Using the Wi-Fi/Bluetooth function282The smartphone sends its location information to the camera via Bluetooth, and thecamera performs recording while writing the acquired location information.Preparations:Enable the GPS function on the smartphone.1 Make a Bluetooth connection to the smartphone. (P268)2 Select the camera’s menu. (P55)• The camera will enter a mode where location information can be recorded and [ ] willbe displayed on the recording screen.3 Take pictures on the camera.• Location information will be written to the recorded pictures.• To disable the recording of location information, set [Location Logging] to [OFF] on the camera.Recording location information to the camera’s imagesWireless connectivity required:A The smartphone acquireslocation information.B The smartphone sends thelocation information.C The camera performs recordingwhile writing the locationinformation.> [Setup] > [Bluetooth] > [Location Logging] > [ON]When [ ] is flashingLocation information is not acquired, so data cannot be written. Positioning with the GPS on thesmartphone may not be possible if the smartphone is in a location such as a building or a bag.Move the smartphone to a location where positioning performance can be optimized, such asone that offers a wide view of the sky, to try positioning. In addition, refer to the operatinginstructions of your smartphone.• Images with location information are indicated with [ ].• Be sure to pay special attention to the privacy, the likeness rights, etc. of the subjectwhen you use this function. Use at your own risk.• The smartphone drains its battery faster while acquiring location information.Not available in these cases:• Location information is not written to motion pictures recorded in [AVCHD] format.BluetoothBluetooth MENU
