Panasonic DIGA DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Getting started15VQT0P03Getting startedDVD only≥Connect an amplifier with a built-in Dolby Digital or DTS decoder.(l 7)≥Change the settings in “Digital Audio Output”. (l 42)≥You cannot use any amplifier with a DTS Digital Surround decodernot suited to DVD.≥Even if using this connection, output will be only 2 channels whenplaying DVD-Audio.DVD onlyThe unit has DVD/VHS COMMON OUT terminals and DVD OUTterminals.DVD/VHS COMMON OUT≥For DVD/VHS COMMON OUT terminals, both DVD and VHSsignals can be output.DVD OUT≥This is the dedicated terminal to enjoy pictures played on DVD inhigher picture quality. (l right)≥The DVD OUT terminals can only output the DVD signal. If your TVis connected to the DVD OUT terminals, the VHS picture is notdisplayed on your TV unless you select the TP channel (l 59).DVD onlyS VIDEO OUT terminalThe S VIDEO OUT terminal achieves a more vivid picture than theVIDEO OUT terminal. (Actual results depend on the TV.)DVD onlyCOMPONENT VIDEO OUT terminalThese terminals can be used for either interlace or progressiveoutput (l 66) and provide a purer picture than the S VIDEO OUTterminal.Connection using these terminals outputs the colour differencesignals (P B /PR) and luminance signal (Y) separately in order toachieve high fidelity in reproducing colours.If the TV is compatible with progressive output, a high quality picturecan be output because the unit’s component video output terminaloutputs a progressive output signal.≥For progressive output l 18≥Connect to terminals of the same colour.∫ Connecting an amplifier or systemcomponent1 To enjoy multi-channel surround sound onDVD-Video (digital connection)1 Connection to a stereo amplifier(analog connection)∫ DVD output and DVD/VHS outputOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM)OPTICAL IN(1)(3)(4)(5)(2)A(1) Rear panel of the unit(2) Optical digital output terminal(3) Optical digital audio cable(not supplied)Do not bend when connecting.A Insert fully, with this sidefacing up.(4) Optical digital input terminal(5) Amplifier’s rear panelCOMPONENT VIDEO OUT(NTSC:480p/480i, PAL:57Y P B P RDVD OUTR - AUDIO - L VIDEO S VIDEO(5)(2)(3)(1)(4)R LAUDIO IN(1) Rear panel of the unit(2) Audio output terminals (L/R)(3) Audio cable (not supplied)A Red (R)B White (L)(4) Audio input terminals (L/R)(5) Amplifier’s rear panelOPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM)COMPONENT VIDEO OUT(NTSC:480p/480i, PAL:576p/576i)Y P B P RDVD OUTR - AUDIO - L VIDEO S VIDEO R - AUDIO - L VIDEODVD/VHS COMMON OUTDVD/VHS COMMON OUTDVD OUT∫ To enjoy even higher fidelity1 Connection to the S Video terminal1 Connection to the component videoterminalsCOMPONENT VIDEO OUT(NTSC:480p/480i, PAL:576p/576i)Y P B P RDVD OUTR - AUDIO - L VIDEO S VIDEO(5)(3)(1) (2)(7)(6)S VIDEO INAUDIO INVIDEO IN(4)R L(1) Audio input terminals (L/R)(2) S Video input terminal(3) Audio cable (not supplied)A Red (R)B White (L)(4) S Video cable (notsupplied)(5) Rear panel of the unit(6) Audio output terminals (L/R)(7) S Video output terminalTVCOMPONENT VIDEO OUT(NTSC:480p/480i, PAL:576p/576i)Y P B P RDVD OUTR - AUDIO - L VIDEO S VIDEO(5)(3) (4)COMPONENTVIDEO INAUDIO IN(1) (2)(6)(7)R L(1) Audio input terminals (L/R)(2) Component input terminals(3) Audio cable (not supplied)A Red (R)B White (L)(4) Video cables (not supplied)(5) Rear panel of the unit(6) Component video outputterminals(7) Audio output terminals (L/R)TV