Editing32VQT0P03DVDYou can perform various kinds of title editing.Preparation≥Release protection (disc l 28, cartridge l 28). [RAM]≥Press [DVD].[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,1] to select a desired title.≥To show other pages l 31≥Multiple editing l 31[2] Press [SUB MENU].[3] Select “Edit” with [3, 4] andpress [ENTER].[4] Use [3, 4] to select a desired itemand press [ENTER].≥The editing screen for the selected item appears.∫ To return to the previous screenPress [RETURN].∫ To exit the screenPress [RETURN] several times.[RAM] [-R] [-RW‹V›] [+R]≥Follow steps 1 to 3 of “Edit”.[4] Select “Enter Name” with [3, 4] and press[ENTER].Refer to “Entering text”. (l 30)[RAM] (Multiple editing l 31)≥Follow steps 1 to 3 of “Edit”.You can prevent accidental erasure of titles by setting and cancelingthe write-protection.[4] Select “Set up Protection” or “CancelProtection” with [3, 4] and press [ENTER].[5] Select “Yes” with [2] and press [ENTER].For your referenceTitles will be erased even if they are protected if you format the discwith DISC MANAGEMENT (l 29).[RAM]≥Follow steps 1 to 3 of “Edit”.You can remove unnecessary parts of the title such as commercials.[4] Select “Partial Erase”with [3, 4] and press[ENTER].[5] Press [ENTER] at thestart point and endpoint of the sectionyou want to erase.≥For quicker editing l 33[6] Select “Exit” with [3,4] and press [ENTER].[7] Select “Erase” with [2]and press [ENTER].∫To erase another part of the same titleAfter setting the point of “Start” and “End” in step 5, select “Next” instep 6 and perform step 7, then repeat steps 5–7.For your reference≥You may not be able to specify start and end points within3 seconds of each other.≥The disc’s available recording time may not increase after erasingshort parts of titles.[RAM] [-R] [-RW‹V›] [+R]≥Follow steps 1 to 3 of “Edit”.You can change the image to be shown as a thumbnail picture in theTITLE VIEW.[4] Select “ChangeThumbnail” with[3, 4] and press[ENTER].[5] Press [1, PLAY] toplay.[6] Press [ENTER] at thepoint you want todisplay.≥For quicker editing l 33≥To change to another point in the same title- Select “Change” with [3, 4] and press [1, PLAY] and thenrepeat step 6.[7] Select “Exit” with [3, 4] and press [ENTER].≥The thumbnail picture will be changed at this point.1 Edit11 Enter Name11 Set up Protection/Cancel ProtectionSLOW/SEARCHREW FFPLAYSTIME SLIPDIRECT NAVIGATORTOP MENURETURNCANCEL/RESETSTATUSDISPLAYSUB MENUJET REWSKIP/ INDEXFUNCTIONSG-CodePROG/CHECKSKIPPLAYSDIRECT NAVIGATORRETURNSUB MENUOPERATIONSELECTVOLUMECHINPUT SELECTTVVHS DVDTRACKING/V-LOCKDVD/ VHSAVDVD DVDRETURNDIRECT NAVIGATORSUB MENU3, 4, 2, 1ENTER:, 91Set up ProtectionCancel ProtectionPartial EraseChange ThumbnailDivide TitleEnter Namee.g.: DVD-RAM11 Partial Erase11 Change ThumbnailCancel Protection:The padlock markdisappears.DIRECT NAVIGATORDVD-RAM- -*** 01 25.10. M07Set up ProtectionSet up title protection.Yes NoENTER RETURNSELECTSet up Protection:The padlock markappears.DIRECT NAVIGATORDVD-RAM- -*** 01 25.10. M07Cancel ProtectionCancel title protection.Yes NoENTER RETURNSELECTDIRECT NAVIGATOR Partial EraseDVD-RAMStartNextExit0:43.21PLAY08End- -:- -.- - - -:- -.- -Start EndENTERRETURNErase Cancel0 : 58(SP)Partial EraseCorresponding chapter of PLAYLISTS will be erased.Remaining TimeDIRECT NAVIGATOR Change ThumbnailDVD-RAMChangeExit0:01.05Change08 ;ENTERRETURNStart play and select the imageof a thumbnail.- -:- -.- -