Transferring (Dubbing)57VQT0P03Transferring(Dubbing)VHSDVDYou can transfer (dub) programmes recorded on a tape onto a disc°with one stroke of the button.In One Touch Transfer (Dubbing), programmes are automaticallytransferred (dubbed) onto the disc from the location of playback atthe time when the transfer (dubbing) of the tape starts.° Available discs for transfer (dubbing) from tape are [RAM] [-R][-RW‹V›] [+R].Preparation≥Select the unit viewing channel (e.g. AV input) on the TV.VHS (Recording source)≥Press [VHS].≥Insert the video cassette containing the programme to be copied.(l 48)≥Press [AUDIO] to select the audio you wish to record.≥Stop the tape at the position where you wish to start recording.DVD (Recording target)≥Press [DVD].≥Release protection. (disc l 28, cartridge l 28) [RAM]≥Insert a disc and confirm there is sufficient empty space forrecording on it. (l 8, 47)≥Select the recording mode. (l 23)Settings (l 42, TV System)≥When transferring (dubbing) an NTSC tape to a DVD- Set “TV System” on “Connection” in SETUP to “NTSC”.≥When transferring (dubbing) a PAL tape to a DVD- Set “TV System” on “Connection” in SETUP to “PAL”.[1] While both DVD and VHS are stoppedPress and hold [“ DVD, DUBBING] for about 3seconds or more (until “START” on the unit’sdisplay terminates flashing).On the main unit, press [“ DVD].≥Check if transferring (dubbing) starts properly.≥The “DUBBING” indicator on the main unitlights.≥Transferring (Dubbing) is automaticallycompleted when the tape reaches its end orthe disc becomes full.∫To stop transfer (dubbing) in the middlePress [∫, STOP] or press and hold [RETURN] for about 3 secondsor more.Note≥You cannot operate for transferring (dubbing) while timer recordingstandby on both DVD and VHS. Cancel the timer recordingstandby.≥When the transfer (dubbing) is not started or not executed, the“DUBBING” indicator blinks for about 7 seconds. Check if the unit isproperly prepared.Transfer (Dubbing) from VHS∫ One Touch Transfer (Dubbing)(VHS l DVD)SDVD ERASEREC REC MODETIME SLIPTOP MENURETURNSTATUSDISPLAYSUB MENUVHS DVDCREATECHAPTERJET REWTIMERDUBBINGA B CF RecPROG/CHECKDUBBINGDVDRETURNSLOW/SEARCHREW FFPLAYDIRECT NAVIGATORTOP MENUSKIP/ INDEXFUNCTIONSOPERATIONSELECTCANCEL/RESETVOLUMECHINPUT SELECTAUDIOTVVHS DVDTRACKING/V-LOCKG-CodeDVD/ VHSAVAUDIOVHS DVD DVDVHSAUDIO∫“ DVDRETURNVHS DVDVHS DVDCH RECDUBBING/k1.3DUBBING indicator∫Dividing a title to be transferred (dubbed)When transferring (dubbing) from VHS to DVD, the title is dividedby index signal (l 54) detected and then recorded. You can searchdesired titles with Direct Navigator (l 31) after transfer (dub) toDVD.≥Titles recorded within 15 minutes of each other may not bedivided properly.≥The recording time may become longer than the original titledepending on the number of index signals.If you want to transfer (dub) without dividing the contents intotitles, follow the methods below.≥Set “Time Setting” to “On” on the GUI Transfer (l 58).≥Manual Transfer (l 59).