Panasonic DIGA DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Getting started8VQT0P03When you use the discs recorded either PAL or NTSC, refer to thistable.°1 Playable (Y: Possible, k: Impossible)°2 If you select “NTSC” in “TV System” (l 42), the picture may beclearer.°3 Select “NTSC” in “TV System” (l 42).°4 If your TV is not equipped to handle PAL 525/60 signals thepicture will not be appear correctly.[1] Press [<, OPEN/CLOSE] on the main unit toopen the tray.≥You can insert a cartridge or non-cartridge disc.[2] Press [<, OPEN/CLOSE] on the main unit toclose the tray.≥If you insert a DVD-RAM with the write-protect tab set to“PROTECT” (l 28), play starts automatically.Note≥A double-sided disc should be loaded with the side you want torecord/play facing down.≥It is not possible to record continuously from one side of a double-sided disc to the other. You will need to eject the disc and turn itover.≥When using 8 cm DVD-RAM or 8 cm DVD-R, remove the disc fromthe cartridge.∫ Which Disc Types is Playable on What TVTV type Disc Playable°1Multi-system TVPAL YNTSC Y°2NTSC TVPAL kNTSC Y°3PAL TVPAL YNTSC Y°4(PAL60)Optional accessories(Product numbers correct as of April 2005. These may be subjectto change.)DVD-RAM9.4 GB, double-sided, cartridge type:LM-AD240ME (compatible with high speed recording 5k)LM-AD240LE (compatible with high speed recording 3k)4.7 GB, single-sided, cartridge type:LM-AB120ME (compatible with high speed recording 5k)LM-AB120LE (compatible with high speed recording 3k)4.7 GB, single-sided, non-cartridge:LM-AF120ME (compatible with high speed recording 5k)LM-AF120LE (compatible with high speed recording 3k)DVD-R4.7 GB, single-sided, non-cartridge:LM-RF120ME (compatible with high speed recording 8k)LM-RF120LE (compatible with high speed recording 4k)∫ Inserting discs(1) (2)(3)Non-cartridge disc Cartridge disc(1) Insert label-up.(2) Insert fully so it clicks into place.(3) Insert label-up with the arrow facing in.