Panasonic DIGA DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Reference69VQT0P03VHSDVDReferenceBefore requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in thechart do not solve the problem, consult your dealer.Power PageDisplays PageTroubleshooting guideThe following do not indicate a problem with the unit:≥Regular disc/tape rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R, DVD-RW (DVD-Video format) or +R.≥Poor reception due to atmospheric condition.≥Image disturbance during search.≥Operations do not work due to a poor-quality disc. (Try again using a Panasonic disc.)≥The unit freezes due to the activation of one of its safety devices. (Press and hold [Í/I] on the main unit for 10 seconds.)∫ CommonNo power ≥Insert the AC mains lead securely into a known active household mains socket. 14The unit switches to the standbymode.≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on. –The display is dim. ≥Change “FL Display” in the SETUP menu. 42“0:00” is flashing on the unit’sdisplay.≥Set the clock. 46The recording time display, thetransfer (dubbing) processdisplay and the displayedrecording time of MP3 aredifferent from the actual time.≥The time on the unit’s display and the remaining recording time on the screen may beindicated less or more than the actual value.≥The available recording space on DVD-R or +R does not increase when you erase titles.≥Available recording space on a DVD-RW (DVD-Video format) increases only when the lastrecorded title is erased. It does not increase if other titles are erased.≥If you repeat recording or editing about 200 times or more, the remaining capacity of the DVD-R or the +R is reduced and then recording or editing may be disabled.≥The time during fast forward and rewind, or the process during transfer (dub) may not bedisplayed accurately.–––––Compared to the actualrecorded time, the elapsed timedisplayed is less (only whenrecording in NTSC).≥The displayed recording/play time is converted from the number of frames at 29.97 frames(equal to 0.999 seconds) to one second. There will be a slight difference between the timedisplayed and the actual elapsed time (e.g.,actual one-hour elapsed time may display asapproximately 59 minutes 56 seconds). This does not affect the recording.–The tape counter isn’t changing. ≥The tape counter does not change while playing unrecorded parts. The “second” displaychanges as follows:≥The unit’s display also appears like this if the tape is dirty or damaged. Consult your dealer ifthis is the case.––