Panasonic DIGA DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Reference71VQT0P03VHSDVDReferenceRecording, Timer recording, Transfer (dubbing), External input PageDVD Picture PageTimer recording does not workproperly.G- CODE system does not workproperly.≥The timer programme is incorrect or different timer programme times overlap. Correct theprogramme.≥The clock is not correct. Set the clock.≥The unit is not on timer recording standby. (“ ” on the unit’s display is not on.)Press [ , TIMER].27, 534626, 52Timer recording does not stopeven when [∫, STOP] ispressed.≥Press [ , TIMER] to turn “ ” off. Recording stops.≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”,you cannot then stop recording for a few seconds.26, 5243The timer programme remainseven after recording finishes.≥The timer programme remains if set to daily or weekly. 26, 53Cannot transfer (dub) VHS toDVD.≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISCMANAGEMENT”.≥TP channel is not selected on DVD when recording from a video tape to a disc. Select TPchannel.≥Some video tapes on the market (including rental videos) are copy-protected to prevent illegalreproductions. Copy-protected video tapes cannot be properly recorded.≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timerrecording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.2859––Cannot transfer (dub) DVD toVHS.≥A video cassette without the accidental erasure prevention tab is inserted. Use a videocassette with an accidental erasure prevention tab.≥DC channel is not selected on VHS when recording from a disc to a video tape. Select DCchannel.≥Some DVDs on the market (including rental DVD) are copy-protected to prevent illegalreproductions. Copy-protected DVDs cannot be properly recorded.≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the timerrecording list screen, the VHS FUNCTIONS menu screen, etc. are displayed.4864––The sound level aftertransferring (dubbing) is notequal on DVD and on VHS.≥The sound level on DVD and VHS may not match depending on the disc. When the soundlevel in a particular part of the sound source is soft or loud, the sound may be recorded softlyor loudly on a video tape.–Stripe-shaped black noise isrecorded.≥The device in playback is interfering with the TV because the device is too close to the TV.Move the device away from the TV.–Cannot record video or soundfrom the external device.≥The external device is not correctly connected.≥The proper external input channel (AV1, AV2 or AV3) is not selected.6565∫ DVDOn-screen messages do notappear.≥Select “Automatic” in “On-Screen Messages” in the SETUP menu. 42The grey background does notappear.≥Select “On” in “Grey Background” in the SETUP menu. 42The 4:3 aspect ratio pictureexpands left and right.Screen size is wrong.≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” inthe Picture menu to “Off”.≥Check the settings for “TV Aspect” in the SETUP menu.3942There is a lot of after-imagewhen playing video.≥Set “Playback NR” in the Picture menu to “Off”. 39When playing DVD-Video usingprogressive output, one part ofthe picture momentarily appearsto be doubled up.≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing methodor material used on DVD-Video, but should be corrected if you use interlace output.39There is no apparent change inpicture quality when adjustedwith the Picture menu in the on-screen menus.≥The effect cannot be seen with certain types of video. –