Panasonic DIGA DMR-ES30V Operating Instructions Manual

Also see for Diga DMR-ES30V: Operating instructions Quick setup guide Operating instructions Operating instructions Operating manual

Contents

Transferring (Dubbing)65VQT0P03Transferring(Dubbing)VHSDVDWhen connecting to the AV3 input terminals on the front of theunit≥You can also connect to the AV1 or AV2 input terminals on the rear ofthe unit.Before connecting any cables, first make sure that the power forthe unit and the external device are off. Then, after connectingcables, turn on both.Note≥If the audio output of the other equipment is monaural, connect to L/MONO. (Both left and right channels are recorded when connectedthrough L/MONO.)≥The S VIDEO IN terminal achieves a more vivid picture than theVIDEO IN terminal.Preparation≥Select the unit viewing channel (e.g. AV input) on the TV.DVD [RAM] [-R] [-RW‹V›] [+R]≥Release protection (disc l 28, cartridge l 28). [RAM]≥Press [DVD].≥When recording bilingual programmes[RAM]When both M 1 and M 2 is selected on the connected equipment, you can select the audio type in playback.[-R] [-RW‹V›] [+R]Select either M 1 or M 2 on the connected equipment. (You cannot switch between audio types during playback.)≥When the output signal from the external equipment is NTSC, change the “TV System” to “NTSC” in the SETUP menu (l 42).≥This unit cannot record to discs containing both PAL and NTSC signals.VHS≥Insert a video cassette with an accidental erasure prevention tab. (l 48)≥Press [VHS].[1] Press [REC MODE] to select the recording mode. (DVD l 23, VHS l 51)≥DVD [RAM] [-R] [-RW‹V›] [+R]- It is also possible to perform Flexible Recording (FR). (l 24)[2] While stoppedPress [CH, W, X] or [INPUT SELECT] to select the input channel for the equipment you haveconnected.≥Select AV1, AV2 or AV3.Follow the above steps 1 to 2.[3] Start play on the external device.[4] Press [¥, REC] at the point where you want tostart recording.Follow the above steps 1 to 2.[3] Press [1, PLAY].≥Start playing the video cassette and find the recording startpoint.[4] Press [;, PAUSE], then press [¥, REC].≥Put the unit in recording standby mode.[5] Start play on the external device.[6] Press [;, PAUSE] at the point where you wantto start recording.∫ To skip unwanted partsPress [;, PAUSE] to pause recording. (Press again to restart recording.)∫ To stop recordingPress [∫, STOP].For your reference≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.Recording from an external deviceEJECTS VIDEO INVIDEO IN – AUDIO IN – RL/MONOAV3C(2)(1)(3)(1) Audio/Video cable (not supplied)A Yellow (VIDEO)B White (L)C Red (R)(2) S Video cable (not supplied)(3) External device(Playback equipment)1 DVD 1 VHS