Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual

Also see for DVCPRO HD AJ-HD1800E: Parts list

Contents

Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual Manual pdf 27 page image

27Playback1 Insert the cassette tape, and set the VTR to the STOPmode.2 Press the PLAY button.Normal playback commences.3 Adjust the audio playback levels.Before adjusting the playback levels, check that the PBLED is lighted and that the audio adjustment dial is in theunlocked status. If the dial is locked (indicated by thelighted LOCK LED), press it. The LOCK LED goes off,and the lock is released. The analog cue audio level isadjusted using setup menu item No.791 (CUE PB VOL).Normally, the VTR is kept in the UNITY status (thesegment display of the control lights at the center).4 To end the playback, press the STOP button. The VTR isnow set to the STOP mode.z During playback, check that the SERVO lamp is lighted.The playback pictures will be disturbed if the lamp is off orblinking.z The audio playback level of 1394 output cannot beadjusted.Playback phase adjustment functionIf two VTRs are to be used to play the same program, theplayback phase between the VTRs can be adjusted bychanging the playback speed of one of the VTRs.1 Press the TRIM button (“i” or “j” button) while holdingdown the PLAY button. Each time it is pressed, the play-back speed is accelerated or decelerated in incrementsof the number of playback framing fields selected by thesetup menu item No.109 (CAP.LOCK) setting.The SERVO lamp remains off while the tape is beingplayed at the accelerated or decelerated speed.2 Upon completion of the playback phase adjustment,release the PLAY button.The VTRs now return to the standard playback speed,and the SERVO lamp lights.