34Audio Split EditingThe video edit points and audio edit points can be registeredindependently, and editing can be executed with the videopoints offset from the audio points.Audio edit points cannot be registered when the assembleediting mode has been selected.After registering the edit points, proceed with the sameoperations as for insert editing._Registering the edit pointsVideo IN point:While holding down the IN button, press the SET but-ton.Video OUT point:While holding down the OUT button, press the SET but-ton.Audio IN point:While holding down the A-IN button, press the SET but-ton.Audio OUT point:While holding down the A-OUT button, press the SETbutton.If the editing mode is changed to assemble editing afterthe audio edit points have been registered, the audio editpoints will be cleared._Clearing the edit pointsVideo IN point:While holding down the IN button, press thebutton among the number keys.Video OUT point:While holding down the OUT button, press thebutton among the number keys.Audio IN point:While holding down the A-IN button, press thebutton among the number keys.Audio OUT point:While holding down the A-OUT button, press thebutton among the number keys._Modifying the edit pointsVideo IN point:While holding down the IN button, press the TRIMibutton or TRIMj button.Video OUT point:While holding down the OUT button, press the TRIMibutton or TRIMj button.Audio IN point:While holding down the A-IN button, press the TRIMibutton or TRIMj button.Audio OUT point:While holding down the A-OUT button, press theTRIMi button or TRIMj button._Cueing the tape up to the edit pointsCue-up to video IN point:While holding down the IN button, press the PREROLLbutton.Cue-up to video OUT point:While holding down the OUT button, press thePREROLL button.Cue-up to audio IN point:While holding down the A-IN button, press thePREROLL button.Cue-up to audio OUT point:While holding down the A-OUT button, press thePREROLL button.A-OUT buttonA-IN buttonCCCC