80System menusThe underlining (__) denotes the factory setting mode.Video output signal adjustmentsThe control matrix for the adjustments is shown in the tablebelow.External encoder remote controller:Only adjustments of the external encoder remotecontroller are performed.This unitOnly adjustments of the setup menu items are performed.External encoder remote controller/this unitAdjustments can be performed from both the externalencoder remote controller and setup menus.Use the AJ-ER50, an optional accessory, as the externalencoder remote controller. However, its VIDEO PHASE andSYNC PHASE controls will not work.When “CMPST” has been selected as the setup menu itemNo.650 (STYLE) settingExternal encoder remote controller:Only adjustments of the external encoder remotecontroller are performed.This unit:Only adjustments of the setup menu items are performed.External encoder remote controller/This unit:Adjustments can be performed from both the externalencoder remote controller and setup menus.Use the MT-2000 (manufactured by Musashi andrecommended by Panasonic) as the external encoderremote controller. However, its VIDEO PHASE, SYNCPHASE and SC PHASE controls will not work.No./Item Description of setting05ENCODERSELFor setting whether to perform the variousadjustments for the video output signals using thisVTR or using an external encoder remote controller.0000 REMOTEThe various adjustments for the video outputsignals are performed by an external encoderremote controller.0001 LOCALThe various adjustments for the video outputsignals are performed using this VTR.0002 BOTHThe various adjustments for the video outputsignals are performed using both this VTR andan external encoder remote controller.z When an adjustment is made with the externalencoder remote controller, the new values arereflected in the appropriate section of the SetupMenu. The adjusted values are stored on the unitapproximately 5 seconds after making theadjustment. To turn off the power after makingthe adjustment with the external encoder remotecontroller, wait approximately 5 seconds or moreafter completion of the operation before turningthe power off.z For the IEEE 1394 digital output, settings aredisabled in this menu.06V LEVELCTRLFor selecting what is to be controlled when thevideo output level is to be adjusted by anexternal encoder remote controller.0000 HDThe HD video output level can be adjusted.0001 SDThe SD video output level can be adjusted.0002 BOTHBoth the HD and SD video output levels can beadjusted.When [CMPST] is selected in Setup Menu No.650 (STYLE), [BOTH] is selected be defaultregardless of the settings for this item.Setting Adjustment item05:ENCODERSEL06:V LEVELCTRL653: Y LVL (HD)654: Pb LVL (HD)655: Pr LVL (HD)656: BK LVL (HD)658: Y LVL (SD)659: Pb LVL (SD)660: Pr VL (SD)661: BK LVL (SD)REMOTE HD External encoderremote controllerNo adjustmentspossibleSD No adjustmentspossibleExternal encoderremote controllerBOTH External encoderremote controllerExternal encoderremote controllerLOCAL HDThis unit This unitSDBOTHBOTH HD External encoderremote controller/this unitThis unitSDThis unitExternal encoderremote controller/this unitBOTH External encoderremote controller/This unitExternal encoderremote controller/this unitSetting Adjustment item05:ENCODERSEL06:V LEVELCTRL662: V LEVEL663: C LEVEL664: HUE665: SETUP LVLREMOTE HD External encoderremote controllerSDBOTHLOCAL HDThis unitSDBOTHBOTH HD External encoderremote controller/ThisunitSDBOTH
