87Setup menus (continued)*1: When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz(HD, SD) mode is selected in System Menu No. 25 (SYSTEMFREQ), this item is not displayed.The underlining (__) denotes the factory setting mode.No./Item Description of setting100SEARCH ENAFor selecting the direct search dial operation.0000 DIALDirect search dial operations are performed.0001 KEYUnless the search button is pressed, the modedoes not change to the search mode.101SHTL MAXFor selecting the maximum speed of shuttleoperations.0000 x9.8k9.8 times normal speed0001 x16k16 times normal speed0002 x32k32 times normal speedDepending on the tape format, the actual taperunning speed differs slightly from what is indicatedby the superimposed display.102FF. REW MAXFor setting the maximum speed of fast forwardand rewind operations.0000 x16k16 times normal speed0001 x32k32 times normal speed0002 x50k50 times normal speed0003 x60k60 times normal speed0004 x100k100 times normal speedThe maximum speed is automatically limited to50k for the DVCPRO HD and DVCPRO50 formatand to 32k for the DV and DVCAM formats.104REF ALARMFor selecting whether a warning is to bedisplayed when the REF VIDEO signal has notbeen connected.0000 OFFA warning is not displayed.0001 ONA warning is displayed by the blinking STOPlamp.105*1AUTO EE SELFor selecting the VTR mode which is to be setto the EE mode when “0 (EE)” is selected as thesetup menu item No.140 (OUTPUT) setting.0000 S/F/RThe EE mode is established when the VTR is inthe STOP, FF or REW mode.0001 STOPThe EE mode is established when the VTR is inthe STOP mode only.No./Item Description of setting106EJECT EE SELFor selecting the video and audio outputstatuses in the EJECT mode.0000 EEThe EE mode is always established regardless ofthe setup menu item No.140 (OUTPUT) setting.0001 BLACKWhen setup menu item No.140 (OUTPUT) is setto:“EE”: The EE mode is established .“TAPE”: The BLACK mode is established for thevideo signals, and the audio signals aremuted.0002 GRAYWhen setup menu item No.140 (OUTPUT) is setto:“EE”: The EE mode is established .“TAPE”: The GRAY mode is established for thevideo signals, and the audio signals aremuted.If [EE] is selected when the 23/24 Hz or 25 Hz (HD,SD), 50 Hz (HD, SD) mode is selected in SystemMenu No. 25 (SYSTEM FREQ), images are outputin BLACK and voices are muted.107* 1EE MODE SELFor selecting what signals are to be outputwhen the EE mode is established.0000 NORMALSignals delayed by an amount equivalent to thetime taken for the signals to be processed inter-nally are output.0001 THRUThe signals are not processed internally but out-put in their original form with no delay.When 1394 or INT-SG is selected in the videoinput, the system operates as “NORMAL”regardless of the settings in this item.108PLAY DELAYFor setting the play startup time in 1-frameincrements.0000 0: :0015 15109* 1CAP. LOCKFor selecting the field unit for locking theplayback framing.<59/60Hz> <50Hz>0000 2F 0000 2F0001 4F 0001 4F0002 8F110AUTO REWFor selecting whether the tape is to beautomatically wound back to its beginningwhen the tape-end has been detected.0000 OFFThe tape stops when it reaches the tape-end.0001 ONThe tape is rewound to its beginning.
