173 432180x 90xLCD/EVF SETPUSH MENU TO RETURNLCD BRIGHTNESSLOW||||----HIGHLCD COLOR LEVELLOW||||----HIGHEVF BRIGHTNESSLOW||||----HIGH1 2112OFFONMODETurning on/off the Palmcorder and SelectingModesTurn on the power first and then select Modes.ª How to Turn on the Power1 Set the [OFF/ON/MODE] Switch to [ON] while pressing theButton 1.≥The [CAMERA] Lamp lights up.ª How to Switch Modes2 Rotate the [OFF/ON/MODE] Switch.≥With each rotate, the Mode switches in the order of Camera Mode, VCRMode, and Card Playback Mode.≥The appropriate Mode Lamp lights up.ª How to Turn off the Power3 Set the [OFF/ON/MODE] Switch to [OFF] while pressing theButton 1.~~~~~~~~~~~~~~~~~~~~~~~~~Using the ViewfinderBefore using the Viewfinder, adjust the field of view so that the displays insidethe Viewfinder become clear and easy to read.1 Tilt up the Viewfinder.≥The Viewfinder can also be pulled out for use.≥Do not pull on the Eyecup to extend the Viewfinder.2 Adjust the Viewfinder by sliding the Eyepiece CorrectorKnob 1.Using the LCD MonitorWith the LCD Monitor open, you can also record the picture while watching it.1 Set the [OFF/ON/MODE] Switch to [ON].2 Press the [PUSH OPEN] Button 2 and, at the same time,bring out the LCD Monitor about 90x in the direction of thearrow.≥The Viewfinder goes off.3 Adjust the LCD Monitor angle according to the desiredrecording angle.≥The LCD Monitor can rotate a maximum of 180x 3 from the verticalposition to the upward direction and a maximum of 90x 4 to thedownward direction. Forcefully rotating the LCD monitor beyond theseranges will damage the Palmcorder.Closing the LCD monitorPush the LCD Monitor until it is securely locked.ª Adjusting Brightness and Color LevelWhen [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],the following items are displayed:LCD Brightness [LCD BRIGHTNESS]Adjusts the brightness of the image on the LCD screen.LCD Color Level [LCD COLOR LEVEL]Adjusts the color saturation of the image on the LCD screen.Brightness of the Viewfinder [EVF BRIGHTNESS]Adjust the brightness of the image in the Viewfinder.1 Press the [PUSH] Dial and select the item you want to adjust.2 Rotate the [PUSH] Dial and increase or decrease the numberof the vertical bars on the Bar Indication.≥The Bar Indication has 8 steps. A larger number of vertical barsindicates stronger brightness or color saturation.Increasing the Brightness of the Entire LCD MonitorSet the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].To Change the Picture Quality of the LCD MonitorSet the [LCD AI] on the [DISPLAY SETUP] Sub-Menu to [ON] or [OFF].[ON]: The screen image becomes clear and vivid. (The effect variesaccording to the recording scene.)≥These adjustments do not affect the recorded images.≥For other notes, see page 75.CAMERAVCRCARD P.B.OFFONMODE1, 231
