39ZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM121Playback Zoom FunctionA part of the image can be enlarged up to 10 times during playback.1 During playback, press the [P.B. ZOOM] Button on theRemote Controller.≥The center of the image is enlarged to approximately double the size.Changing the Zoom Magnification2 Change the magnification by pressing the [W] or [T] Buttonon the Remote Controller.≥You can increase the magnification up to 10k.Changing the enlarged area of an image3 Press the Arrow Button (π, ∑, ∏, ∫) on the Remotecontroller that points to the area you want to enlarge.≥When the playback is stopped, the position of the enlarged image areais reset to the center automatically.Canceling the Playback Zoom FunctionPress the [P.B. ZOOM] Button on the Remote Controller.≥For other notes, see page 70.~~~~~~~~~~~~~~~~~~~~~~~~~Playback Digital Effect FunctionsDuring playback, special Digital Effects can be added to the Recording. Thedigital effects that may be applied in the process of recording (except Picturein Picture Mode) will be the same as these added effects.1 Press the [1] Button.2 Press the [SELECT] Button on the Remote Controller andselect desired Digital Effect.≥When the [SELECT] Button is pressed repeatedly, the Digital Effectselection changes.MULTI )WIPE )MIX )STROBE )NEGA )SEPIA )B/W )TRAIL) SOLARI )MOSAIC ) MIRROR≥The same setting can also be set using the [DIGITAL EFFECT] on the[VCR FUNCTIONS] Main-Menu.Suspending Playback Digital Effect TemporarilyPress the [OFF/ON] Button 1 to suspend or restart the digital effect. Whenthe digital effect is paused temporarily, the selected effect’s indicationflashes.Canceling the Digital EffectPress the [SELECT] Button on the Remote Controller repeatedly until theDigital Effect Indication is cleared.≥For other notes, see page 70.ª Playback with Wipe Mode and Mix Mode1 Press the [1] Button to start playback.2 Press the [SELECT] Button on the Remote Controller andselect [WIPE] or [MIX].3 Press the [STORE] Button for the moment you want to saveas a still picture.≥The [WIPE] or [MIX] Indication changes to [B] or [C] and theimage is saved.4 Press the [OFF/ON] Button in the scene in which you want touse the Wipe or Mix effect.≥The scene changes as a result of the Wipe or Mix effect.≥The Wipe Function and Mix Function can be used only from the RemoteController during playback.≥If the [OFF/ON] Button is pressed while Wipe Function or Mix Function isused, the effect will stop temporarily at that point. Pressing the [OFF/ON]Button again will bring back the effect.ZOOM 2tZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM213WIPEZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM1234MIX