Panasonic Digital Palmcorder PV-DV953 Operating Instructions Manual

Contents

Panasonic Digital Palmcorder PV-DV953 Operating Instructions Manual Manual pdf 18 page image

18Using the Menu ScreenTo facilitate the selection of a desired function or setting, this Palmcorderdisplays various function settings on menus.1 Press the [MENU] Button.≥The Menu corresponding to the Mode selected by using the [OFF/ON/MODE] Switch 1 is displayed.≥When the [CAMERA] Lamp is on, the Camera Function Menu isdisplayed. 2≥When the [VCR] Lamp is on, the VCR Function Menu is displayed. 3≥When the [CARD P.B.] Lamp is on, the Card Function Menu isdisplayed. 42 Rotate the [PUSH] Dial to select a desired Sub-Menu.3 Press the [PUSH] Dial to display the selected Sub-Menu.4 Rotate the [PUSH] Dial to select the item to be set.5 Press the [PUSH] Dial to set the selected item to a desiredMode.≥With each press of the [PUSH] Dial, the cursor [1] brings up asubsequent Mode. Menu items that cannot be used in combination withthe selected menu items are displayed in dark blue.≥While a Menu is displayed, you cannot begin to record or play back. Menuscan be displayed during playback but not during recording.≥The above operations can be carried out using the Remote Controller.(l 12)≥To display the Menu, press the [MENU] Button 5 on the RemoteController.≥To select items on the Menu, press the [ITEM] Button 6 on theRemote Controller.≥To set the mode for the selected items, press the [SET] Button 7on the Remote Controller.To Exit the Menu ScreenPress the [MENU] Button again.About the Menu Mode SettingThe setting selected on the Menu will be retained even when the Palmcorderis turned off. However, if the Battery or AC Adaptor is disconnected beforeturning the Palmcorder off, the selected setting may not be retained.(But, the setup of [EFFECT2] (l 34) is not retained.)≥Menu operation flow is shown in this text by >>.ª File Selection in the Card Playback ModeA File Selection Operation may be necessary during Menu Operations. In thiscase, carry out the following procedure.1 Turn the [PUSH] Dial and select a file.≥The selected file is marked by a frame 8.2 Press the [PUSH] Dial to confirm the selection of the file.≥After the above File Selection Procedure, carry out the various MenuOperations. (The above procedure will not be repeated in the followinginstructions.)M ENUPICTURENo.25 100-001282 CAMERA FUNCTIONSPUSH MENU TO EXIT1.CAMERA SETUP2.ADVANCED FUNCTIONSPUSH MENU TO EXIT2.DIGITAL EFFECT3.CARD SETUP4.MULTI-PICTURES5.RECORDING SETUP6.AV IN/OUT SETUP7.DISPLAY SETUP8.OTHER FUNCTIONS1.PLAYBACK FUNCTIONSCARD FUNCTIONSPUSH MENU TO EXIT1.DELETE CARD FILE2.CARD EDITING3.DISPLAY SETUP4.OTHER FUNCTIONSVCR FUNCTIONS343.DIGITAL EFFECT4.CARD SETUP6.RECORDING SETUP7.DISPLAY SETUP8.OTHER FUNCTIONS9.DEMO MODE5.MULTI-PICTURES2, 3, 4, 51, 2ZOOMINDEX INDEXSELECTSTORESTOPK L∫OSDCOUNTERV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESET TITLETWsVOLr¥RECMULTI/P-IN-PPHOTOSHOTSTART/STOPA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM 5761CAMERAVCRCARD P.B.234OFFONMODE1PUSHSHUTTER/IRIS/VOL/JOG