53Using the Software with a ComputerAn image stored on the DV Cassette can be transferred to your PersonalComputer.ª Software Installation (Windows)1 Turn on Computer and start up Windows.2 Insert supplied CD-ROM into the CD-ROM drive.≥[Setup Menu] 1 appears.3 Select the software to be installed from [Setup Menu].≥USB Driver (l 54):Software for USB Driver allows you to transfer images directly off of thememory card into the computer.(Please refer to page 54 to install the driver of the USB Driver.)≥DV STUDIO 3.1E-SE (l 58):Using the DV STUDIO 3.1E-SE software allows you to capture videorecorded on a tape or still images viewed through the lens of a camera.≥G.726 Audio Decoder (l 59):Software for G.726 Audio Decoder allows you to listen to MPEG4 soundwith Windows Media Player.≥ArcSoft Software (l 60):PhotoImpression 4.0, PhotoBase 4.0, Panorama Maker 3.0 andPhotoPrinter 4.0 are included.4 Follow the instructions on the computer screen until theinstallation is complete.≥Setup window will disappear when the installation is complete.Note:If a window does not appear automatically, click the “Start” Button on yourdesktop and then click “Run”. When the “Run” Box is open, type in“D:\InstMenu.exe” and click “OK”. (“D” applies when the CD-ROM drive isdrive D.)~~~~~~~~~~~~~~~~~~~~~~~~~Using USB Driverª Operating environment≥Despite having the operating environment indicated, it may not be possibleto use the program with some types of personal computers.≥A CD-ROM drive is required to install this program.OS:IBM-PC/AT compatible personal computer with pre-installed;Microsoft Windows XP Home Edition/ProfessionalMicrosoft Windows 2000 ProfessionalMicrosoft Windows Me (Millennium Edition)Microsoft Windows 98 Second EditionCPU:Intel Pentium II/ Celeron 300MHz or higher (including compatible CPU)RAM:32 MB or more (64 MB or more is recommended)(128 MB or more are required for Windows XP.)Free hard disk space:At least 1 MBPorts:USB Terminal2 1K2KY8CD00002VFF0162
