110VQT1G66With other productsWith a printer (PictBridge)To print pictures by directly connecting this unit tothe printer, use a printer compatible withPictBridge.(Read the operating instructions for the printer.)≥ Use the AC adaptor to free you from worryingabout the battery running down.≥ Insert an SD card with recorded images inthis unit and then turn on the power.≥ You cannot use in STD mode.1 Connect this unit and a printer.A USB cable (supplied)The USB function selection screen will appear.≥ Insert the plugs as far as they will go.≥ Do not use any other USB connection cablesexcept the supplied one. (Operation is notguaranteed with any other USB connectioncables.)2 Select [PictBridge] and press thecursor button.The [PictBridge] indication appears on this unit’sscreen.≥ If the [PictBridge] indication does not appear orcontinues to flash, disconnect and thenreconnect the USB cable or check the printer,SD card and settings on this unit.3 Select a file to be printed, thenpress the cursor button.The number of prints set is displayed.4 Move the cursor button up ordown to select the desirednumber of prints, then press thecursor button.≥ You can set up to 9 prints.≥ To cancel the setting, set the number of printsto [0].≥ Up to 8 files can be set in succession byrepeating steps 3 and 4.5 Press the MENU button todisplay the PictBridge menus.6 Select the date print setting on[DATE PRINT].≥ If the printer is not capable of date printing, thissetting is unavailable.PHOTO
