119VQT1G66With a computerConnection and recognitionAfter the software applications are installed, thisunit must be connected to the computer and becorrectly recognised by the computer.≥ Connect after installing the softwareapplications.≥ Remove the supplied CD-ROM if it is insertedin the computer. (If the [Setup Menu] screen isdisplayed, wait until it finishes and then removethe CD-ROM.)≥ If the recognition procedure is notaccomplished properly, operation will not bepossible after connecting the unit to thecomputer.≥ If the unit fails to operate normally, it may meanthat you have not conducted the installation orrecognition procedure properly.≥ Be sure to finalize all discs other thanDVD-RAM before using them with acomputer. Un-finalized discs cannot berecognised by the computer.1 Connect this unit to the ACadaptor.≥ If a battery is used, operation is not possiblewhen this unit is connected to a computer.2 Insert a disc or card withrecorded images in the unit, thenturn on the unit.3 Connect this unit and acomputer.A USB cable (supplied)The USB function selection screen will appear.≥ Insert the plugs as far as they will go. The unitand computer will not operate properly if theplugs are not inserted fully.≥ Do not use any other USB connection cablesexcept the supplied one. (Operation is notguaranteed with any other USB connectioncables.)4 Select [PC CONNECT (DISC)] or[PC CONNECT (CARD)] and thenpress the cursor button.This unit is automatically recognised by thecomputer.Connection and recognitionprocedures
