123VQT1G66With a computer3 Verify the following items aredisplayed.ª If the driver has been recognisedproperlyWhen using a disc:≥ [MATSHITA HDC-SX5(DVD) USB Device] isdisplayed at [DVD/CD-ROM drives].≥ [USB Mass Storage Device] is displayed at[Universal Serial Bus controllers].When using an SD card:≥ [MATSHITA HDC-SX5(SD) USB Device] isdisplayed at [Disc drives].≥ [USB Mass Storage Device] is displayed at[Universal Serial Bus controllers].ª If the driver has not beenrecognised properly[!] or [Unknown device] appears at [UniversalSerial Bus controllers] or [Other devices], etc.(Where the display will appear depends on thetype of computer you are using.)You can use the following method to enable it tobe recognised.Method 1:Turn off the unit and your computer once and tryagain.Method 2:Eject the disc or SD card and try verifying again.Method 3:Try connecting the unit to another USB port onyour computer.Using HD Writer 2.0E for SX/SD≥ When using HD Writer 2.0E for SX/SD onWindows XP/2000, log on to your computer asAdministrator (or with a login name equallyauthorized). If you log on with a login nameother than Administrator, you cannot use theapplications.≥ When using HD Writer 2.0E for SX/SD onWindows Vista, log on to your computer asAdministrator (or with a login name equallyauthorized) or with the user name for astandard user account. If you log on with auser name for a guest user account, thesoftware cannot be used.ª Copying data on a disc or an SDcard to the hard disk of thecomputer1 Connect this unit to the ACadaptor.≥ If a battery is used, operation is not possiblewhen this unit is connected to a computer.2 Insert a disc or card withrecorded images in the unit, thenturn on the unit.
