Others146VQT1G66ª With a computerThe images may be still for several seconds at the joins between the scenes if the following operationsare performed when multiple scenes have been continuously played back using another unit.* Just how smoothly the scenes will be played back continuously depends on the playback unit.Depending on the unit used, the images may stop moving and become still for a moment even whennone of the following conditions are applicable.ª When the scenes were recorded on different datesA The image will be still for several seconds wherever the date changes.B The images are played back smoothly if the scenes were recorded on the same date.Problem Check pointsEven if connected by theUSB cable, this unit is notrecognised by thecomputer.≥ Is the AC adaptor connected?# Use the AC adaptor when connecting this unit and a computer.≥ Select another USB terminal on the computer.≥ Check the operating environment. (l 115)≥ Turn the power to the unit off and then back on again and reconnectthe USB cable.When the USB cable isdisconnected, an errormessage will appear onthe computer.≥ To disconnect the USB cable safely, double-click the ( ) iconin the task tray and follow the instructions on the screen.Cannot see the PDFoperating instructions forHD Writer 2.0E for SX/SD.≥ Is Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or laterinstalled on the computer that you are using?# You will need Adobe Acrobat Reader 5.0 or later or AdobeReader 7.0 or later to read the PDF operating instructions forHD Writer 2.0E for SX/SD.If scenes do not change smoothly when played back on another device
