132VQT1G66Othersª [DISPLAY]The screen indications are selected as shown inthe illustration below.[OFF][ON]ª [POWER SAVE][OFF]:The power saving function is not activated.[5 MINUTES]:When about 5 minutes have passed without anyoperation, this unit automatically turns off toprevent the battery from running down. Whenyou use this unit turn it on again.≥ In the following cases, the unit may not turn offeven when you set this to [5 MINUTES].jWhen using the AC adaptorjWhen connecting the unit to a computer orprinter via the USB cablejWhen PRE-REC is usedª [BEEP SOUND]This allows operations such as starting andending recording to be signaled by a beep.When [OFF] is set, no beep is heard when anoperation such as recording is started or ended.1 BeepWhen you start recordingWhen you turn on the powerWhen this unit is recognised by the computer orthe printer, etc.2 BeepsWhen you pause recordingWhen you turn off the power2 Beeps for 4 timesWhen an error occurs e.g. recording not starting.Check the sentence displayed on the screen.(l 135)ª [INITIAL SET] (HD mode only)When there is a menu that cannot be selecteddue another function or mode being activated,set to [YES] for changing the menu settings backto the initial shipping condition.(The language setting cannot be changed backto the initial shipping condition.)ª [DEMO MODE] (HD mode only)This item is used to start the unit demonstration.(Only when the mode dial is at the orposition) If you set this to [ON] without inserting adisc or an SD card, this unit is automatically setto the demonstration mode for introducing itsfunctions. If any button is pressed or operated,the demonstration mode is cancelled. If nooperations take place for approx. 10 minutes, thedemonstration mode automatically starts. Toterminate the demonstration mode, insert a discor an SD card, or set this to [OFF]. For normaluse, set this function to [OFF].Menus related to [SETUP]≥ [OFF] ≥ [ON]≥ [OFF] ≥ [5 MINUTES]1+≥ [OFF] ≥ [ON]≥ [YES] ≥ [NO]≥ [OFF] ≥ [ON]
