71VQT1G66Recording2 Move the cursor button left orright to adjust the microphoneinput level.A LeftB RightC Microphone input level≥ A gain value for each of the 2 built-inmicrophones is displayed. (The input level ofthe microphones cannot be set individually.)3 Press the cursor button to setand then press the MENU buttonto finish the setting.D Microphone input level meter≥ Microphone input level meter is displayed onthe screen.To return to automatic settingPress the MENU button, then select [VIDEO] >[MIC LEVEL] > [AUTO] and press the cursorbutton.≥ Adjust the gain value so that the last 2 bars ofthe microphone input level on the centre of thescreen will not light red. (Otherwise, the soundis distorted.) Select a lower setting for gainvalue or set [MIC LEVEL] to [AUTO].≥ The microphone input level meter displays themicrophone input level for the built-inmicrophone with the larger volume.≥ When [ZOOM MIC] is [ON], the volume will bedifferent depending on the zoom rate. Set[ZOOM MIC] to [OFF] or set the microphone inputlevel after adjusting the zoom rate. (l 60)Parts where white saturation (colour saturation)is likely to occur (extremely brightly lit or shinyparts) are displayed with diagonal lines (zebrapattern).¬ Rotate the mode dial to select or.Press the MENU button, then select[ADVANCED] # [ZEBRA] # [ON] andpress the cursor button.A Zebra pattern≥ You can record an image with little whitesaturation if you manually adjust the shutterspeed or brightness (iris/gain) (l 76).To cancel the zebra displayPress the MENU button, then select[ADVANCED] # [ZEBRA] # [OFF] and pressthe cursor button.≥ The zebra pattern does not appear on theimages actually recorded.DZebra displayThis is for displaying the parts thatare too bright.VIDEO PHOTOA
