Settings40 KW2M-A/X User's Manual5.5.2 Settings for Power MeasurementItem Description1 Select unit and CH Select unit and CH to set.2 Phase/Wire system Select phase and wire system for power measurement.
1P2W, 1P3W, 3P3W, 3P4W (initial: 1P2W)3 Cutoff current Set a ratio of current for rated current used for cutoff that is notmeasured.0.1 to 50.0% (initial: 0.1)4 Hour meter Select phase and current that is measured as ON-time bypercentage.
Target phase: Phase1, Phase2, Phase3, ALL (initial: Phase1)Threshold: 0.1 to 100.0% (initial: 10.0)5 Simple measuring Select mode and set parameters for simple measuring.
Type:OFF (inactive)kVLT/PF Fixed (use actual current with fixed voltage and PF)SingleCT (use phase 1 current and all voltage)(initial: OFF)VLT*: 0.0 to 500000.0V (initial: 230V)PF*: 0.000 to 1.000 (initial: 1.000)* VLT and PF can be set when ‘VLT/PF Fixed’ is selected.1234 567891011
