Feature Manual References20.1.16 Unified Messaging—Call Transfer to Outside20.1.20 Unified Messaging—Caller ID ScreeningDescriptionAllows the Unified Messaging system to announce the name of the caller when transferring a call to anextension from a preprogrammed caller (e.g., "You have a call from [name of caller]."). Caller names must berecorded beforehand. Caller names can be recorded by each subscriber (Caller NameAnnouncement—Personal) and for the entire system (Caller Name Announcement—System).PC Programming Manual References21.1 UM Configuration—[2] Class of Service—Call Transfer— Caller ID ScreenFeature Manual References20.1.21 Unified Messaging—Caller Name AnnouncementOperating Manual ReferencesManager Operation2.2.1 System Manager Features— Setting Class of Service (COS) Parameters20.1.21 Unified Messaging—Caller Name AnnouncementDescriptionAllows you to store telephone numbers and record a caller name for each telephone number. The caller nameis announced when playing a message in their mailbox from one of the preprogrammed callers, when thesystem directs a call to the subscriber from one of the preprogrammed callers (Caller ID Screening), and whenthe system pages the subscriber by intercom (Intercom Paging).There are 2 types of Caller Name Announcement.• Caller Name Announcement—PersonalAllows subscribers to store a maximum of 30 telephone numbers using a telephone.• Caller Name Announcement—SystemAllows the System Administrator to store a maximum of 200 telephone numbers using a PC.Conditions• If the same telephone number is programmed for both the system and personal caller name announcement,the personal caller name will be announced.PC Programming Manual References21.1 UM Configuration—[2] Class of Service—Mailbox— Number of CIDs for Caller Name Announcement(Selection)24.3 UM Configuration—[5-3] System Parameters—System Caller Name Announcement398 Feature Manual Document Version 2016-0320.1.21 Unified Messaging—Caller Name Announcement
