5.1.8 DIL (Direct In Line)DescriptionDirects an incoming public CO line call to a preprogrammed destination based on the CO line carrying the call.Each CO line has a destination for each time mode.[Method Flowchart]A CO line call is received.YesYesNoDoes the call haveCaller ID information and is CLIdistribution enabled for the CO line inthe current time mode?NoHas the callerbeen stored in the System SpeedDialing Table and has a CLI destinationbeen assigned?The call is routed to theDIL destination.The call is routed to itsCLI destination.The call is routed to anoperator (InterceptRouting—No Destination).YesIs a DIL destination assignedfor the current time mode?No[Programming Example: DIL Table]The table can be programmed for each CO line.Port No.(CO Line No.)0102DayEnableEnableLunchDisableDisableNightDisableDisableBreakEnableDisableDay101102Lunch100100Night100100Break101102CLI Distribution DIL Destination*1*1 ® 18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL— DIL Destination—Day, Lunch,Break, NightIn this example:If a CO line call is received on CO line 01:In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination, ifassigned. If not assigned, the call is routed to the Direct In Line (DIL) destination, extension 101.In lunch mode: CLI distribution is disabled. The call is routed to the DIL destination, extension 100.96 Feature Manual Document Version 2016-035.1.8 DIL (Direct In Line)
