20.1.50 Unified Messaging—List All NamesDescriptionAllows callers to listen to a list of all subscribers’ names and extension numbers in Automated Attendant serviceor Custom Service.Conditions• This feature is only available when:a. The subscriber’s name has been recorded.b. The subscriber’s extension number is set.c. The "Directory Listing" parameter for the subscriber’s Class of Service is set to "Yes".• To return to the previous menu in Automated Attendant service or Custom Service, press .Feature Manual References20.1.6 Unified Messaging—Automated Attendant (AA)20.1.27 Unified Messaging—Custom Service20.1.51 Unified Messaging—Live Call Screening (LCS)DescriptionAllows the subscriber to monitor incoming calls as messages are being recorded. The subscriber has the optionof answering calls while monitoring or allowing the message to be recorded without interruption. There are 2modes in this feature: Hands-free and Private. Hands-free mode allows the subscriber to hear the caller throughthe telephone’s speaker and answer the call by lifting the handset. Private mode alerts with a tone and requiresthe telephone handset to be lifted before the message can be monitored. The subscriber can talk to the callerby pressing the LCS button on his or her proprietary telephone (if programmed).Conditions• This feature is not available for SIP extensions. For more information about telephone types that supportthis feature, refer to the Operating Manual.• LCS ButtonA flexible button can be customized as the LCS button.• Extension Personal Identification Number (PIN)To prevent unauthorized monitoring, it is recommended the LCS user assign an extension PIN. This PINwill be required when setting LCS (® 6.1.10 Extension PIN (Personal Identification Number)). If the userforgets the PIN, it can be cleared by an extension assigned as the manager.• Each extension can be programmed to either end recording or continue recording the conversation afterthe call is intercepted, through personal programming (LCS Mode Set [After Answering]).• To use the LCS feature on a PS in Wireless XDP Parallel Mode, LCS can only be turned on or off from thewired telephone. In Wireless XDP Parallel Mode, setting LCS on/off from the PS has no effect.(® 22.1.6 Wireless XDP Parallel Mode)• A sub extension of a one-numbered extension cannot perform LCS. (® 14.1.7 One-numberedExtension).414 Feature Manual Document Version 2016-0320.1.51 Unified Messaging—Live Call Screening (LCS)
