[Programming Example: System Speed Dialing Table]Location(System SpeedDialing No.)000001System SpeedDialing Name*1ABC CompanyXYZ CompanyTelephone No.*2912125551234913135551234CLI Destination*3200300*1 ® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial— Name*2 ® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial— CO Line Access Number + Telephone Number*3 ® 14.1 PBX Configuration—[6-1] Feature—System Speed Dial— CLI DestinationIn this example:If the caller’s telephone number is "1-212-555-1234":1. The PBX looks for the number in the System Speed Dialing Table. (The CO Line Access number, "9", isdisregarded.) The number is found in location 000.2. If CLI distribution is enabled in the current time mode for the DID number or for the CO line carrying thecall (for DIL distribution), the call is routed to its CLI destination, extension 200.Conditions• If Automatic Caller ID Modification is used:Store the modified number in the System Speed Dialing Table.PC Programming Manual References14.1 PBX Configuration—[6-1] Feature—System Speed Dial→ Name→ CO Line Access Number + Telephone Number→ CLI Destination18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—CLI for DIL— CLI Ringfor DIL—Day, Lunch, Break, Night18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table— CLI Ring for DDI/DID—Day, Lunch,Break, NightFeature Manual References4.1.3 Caller ID5.1.7 DID (Direct Inward Dialing)5.1.8 DIL (Direct In Line)10.1.11 INCOMING CALL FEATURES18.1.10 Speed Dialing, System4.1.15 CLIP (Calling Line Identification Presentation)DescriptionCalling Line Identification Presentation (CLIP):The PBX can send a preprogrammed telephone number to the network when an extension user makes a call.The called party can see the number on his telephone display before answering the call.74 Feature Manual Document Version 2016-034.1.15 CLIP (Calling Line Identification Presentation)
