To set/cancel (Call Forwarding [FWD] for your Incoming Call Distribution Group)PT/SLT/PS/SIP Extn./S-PS01 SetCancelOREnter 1 to setor 0 to cancel. Enter ICD Groupextension number.ICD Groupextension no.Off-hook.564 Both CallsIntercom CallsOutside CallsOROREnter 71.17Enter 4 to 6 asyou desire.Enter #. On-hook.Enter destination extension number.Or enter outside line access numberand then outside phone number.OR(max. 32 digits)outsidephone no.outside lineaccess no. C.ToneICD Group: Incoming Call Distribution GroupFor "Cancel", go on-hookdirectly after entering ICDGroup extension number.destinationextension no.• For KX-UT series SIP phones (except KX-UT670), when Call Forwarding or Do Not Disturbis enabled, FWD/DND appears on the display in stand-by mode. For KX-UT670, when CallForwarding or Do Not Disturb is enabled, a status icon appears on the display. For details,refer to the documentation for your phone.• The FWD/DND button light shows the current status as follows:Off: Both features are not set.Red on: FWD modeFlashing red slowly: DND modeFor KX-UT series SIP phones, you can see the current status on the display.• The Group FWD button light shows the current status as follows:Off: No setRed on: FWD modeUser Manual 1091.6.1 Forwarding Calls
