1.4 During a Conversation1.4.1 Transferring a Call (Call Transfer)– Transferring to an Extension in the PBX– Transferring to an Outside Party Using the PBX Service– Transferring a Call Using the ISDN Service (Call Transfer [CT]—by ISDN)– Transferring to an Outside Party Using the SIP Service• You can transfer a held call without talking, and go on-hook even if the transferred party doesnot answer the call.If a transferred call is not answered within a specified time, it will ring at a preprogrammedextension, if set, or at your extension again. If you are off-hook at that time, you will hear analarm tone. If an outside call is not answered within a specified time, it is automaticallydisconnected.• For users of KX-UT series SIP phones:When using a transfer feature on a KX-UT series SIP phone, the operation is different to thatof other PTs, as follows.– When the transferring party presses the TRANSFER button to transfer a call, the CallerID of the transferring party is sent to the transfer destination party.– When pressing the TRANSFER button to transfer a call received from an outside line, ifthe transfer destination is using a PT, the transferred call will be received to theINTERCOM button. The call will be recorded as an intercom call from the transferrer, inthe transfer destination's call log.• For users of non-KX-UT series SIP phones:– Even if your telephone has a TRANSFER button, you cannot use it to transfer calls.Please make sure to use the HOLD button.– The transfer operation for SIP extension users may differ from the steps in this section,and may vary depending on the type of telephone being used.– Blind TransferBlind Transfer may be available on your phone. For details about using Blind Transfer,refer to the documentation for your SIP phone. (This feature is not available whentransferring to an outside party using the SIP service.)66 User Manual1.4.1 Transferring a Call (Call Transfer)
