On-hook.Talk.Seize outside line.During a conversationSLTPress Recall/hookswitch. Dial outside phonenumber.outside line outsidephone no.ORC.ToneSIP Extn./S-PSOn-hook.Talk.Seize outside line.During a conversationDial outside phonenumber.outside line outsidephone no.*This step can be omitted(KX-UT series and S-PS only).KX-UT series and S-PS:Press TRANSFER.Other than KX-UT series and S-PS:Press HOLD.HOLDORXFERC.ToneKX-UT seriesand S-PS only.• * For SIP phone users, instead of going on-hook, if you press the TRANSFER button(KX-UT series [except KX-UT670]), Transfer Cancel button (KX-UT670) once, or the HOLDbutton (non-KX-UT series) once or twice (depending on the telephone being used), you canreturn to the held call. The call with the transferred party will be disconnected.• Time limitBoth the caller and the transferred party will hear an alarm tone fifteen seconds before aspecified time period, and the call will be disconnected.• To return to the held call before the destination answers, press the TRANSFER button,the corresponding CO, ICD Group, INTERCOM, or DN button, or the hookswitch.Customising Your Phone• 3.1.3 Customising the ButtonsCreate or edit a Direct Station Selection (DSS) button.User Manual 691.4.1 Transferring a Call (Call Transfer)
