4.6 CO Line ProgrammingPause Time412System Programming 4-99Description Assigns the length of the pause time. The programmed pause timeis automatically inserted after a line access code or a host PBXaccess code programmed in [411] “Host PBX Access Codes” ormanually inserted if the PAUSE button is pressed by the user.Selection • CO line group number: 1 through 8, ( =all CO line groups)• Time (seconds): 1.5 / 2.5 / 3.5 / 4.5 / 5.5 / 6.5Default All CO line groups – 3.5 sProgramming 1. Enter 412.Display: TRG Pause Time2. Press NEXT.Display: TRK GRP NO?–>3. Enter a CO line group number.To enter CO line group number 1, you can also press NEXT.Display example: TRG1:3.5sec4. Keep pressing SELECT until the desired time is displayed.5. Press STORE.6. To program another CO line group, press NEXT or PREV, orSELECT and the desired CO line group number.7. Repeat steps 4 through 6.8. Press END.Conditions • To assign all CO line groups to one selection, press the key at step 3.In this case, the display shows the contents programmed for CO linegroup 1.• Program [401] “CO Line Group Assignment” is used to assign each COline to a CO line group.• If the programmed pause time is 1.5 or 2.5 seconds and you are storingan external number in program [001] “System Speed Dialling NumberSet,” it is required to store a pause manually after the line access code.Feature References Section 3, Features,Host PBX Access Pause Insertion, Automatic
