4.10 Resource ProgrammingMusic Source Use8034-160 System ProgrammingDescription Assigns the music source to be used for Music on Hold andBackground Music (BGM).Selection • Hold / BGM• Music source number: KX-TD816 – 1 or 2 / No UseKX-TD1232 – 1 through 4 / No UseDefault Hold and BGM – Music 1Programming 1. Enter 803.Display: Music Source Use2. Press NEXT to program Music on Hold.Display example: Hold:Music13. Enter a music source number.To select no music source, press CLEAR.To change the current entry, enter the new music source number.4. Press STORE.5. Press NEXT to program BGM.Display example: BGM :Music16. Enter a music source number.To select no music source, press CLEAR.To change the current entry, enter the new music source number.7. Press STORE.8. Press END.Conditions • The music source is a user-supplied item. Two music sources can beinstalled per system. For KX-TD1232, music sources 1 and 2 areconnected to the Master System, 3 and 4 are to the Slave, if available.Any music source can be used by either system.• The system is provided with an internal music source. By defaultsetting, external music source is used as Music Source 1. Program[990] “System Additional Information, Area 02 – Bit 10” is used toselect internal music source for Music Source 1.• To disable music, press CLEAR at steps 3 and 6.• Program [804] “External Pager BGM” is used to enable / disable BGMfor each external pager.Feature References Section 3, Features,Background Music (BGM) Music on HoldBackground Music (BGM) – External
