Panasonic KX-TG1061C Operating Instructions Manual

Getting started12Initial settingsSymbol meaning:Display languageYou can select either “English” or “Français”as the display language. The default setting is“English”.1 {MENU} i {#}{1}{1}{0}2 {V}/{^}: Select the desired setting.3 Press the middle soft key to save.4 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Voice guidance languageYou can select either “English” or “Français”as the voice guidance language of the answeringsystem. The default setting is “English”.1 {MENU} i {#}{1}{1}{2}2 {V}/{^}: Select the desired setting.3 {SAVE} i {OFF}Dialing modeIf you cannot make calls, change this settingaccording to your telephone line service. Thedefault setting is “Tone”.“Tone”: For tone dial service.“Pulse”: For rotary/pulse dial service.1 {MENU} i {#}{1}{2}{0}2 {V}/{^}: Select the desired setting.3 {SAVE} i {OFF}Date and time1 {MENU} i {#}{1}{0}{1}2 Enter the current month, date, and year byselecting 2 digits for each.Example: July 15, 2009{0}{7} {1}{5} {0}{9}3 {OK}4 Enter the current hour and minute (12-hourclock format) by selecting 2 digits for each.Example: 9:30{0}{9} {3}{0}5 {AM/PM}: Select “AM” or “PM”.6 {SAVE} i {OFF}Note:L When English is selected as the displaylanguage, 12-hour clock format is used. WhenFrench is selected, 24-hour clock format isused.L To correct a digit, press {^} or {V} to move thecursor to the digit, then make the correction.L The date and time may be incorrect after apower failure. In this case, set the date and timeagain.Symbol Meaning= Perform with the base unit.Y Perform with the handset.Example:{V}/{^}: “Off”Press {V} or {^} to selectthe words in quotations.= Base unit / Y HandsetY HandsetY HandsetY HandsetTG106xC(e).book Page 12 Wednesday, February 25, 2009 11:13 AM