Making/Answering Calls13Making callsUsing the base unit =1 Dial the phone number.L To correct a digit, press {CLEAR}.2 Lift the corded handset.3 When you finish talking, place the cordedhandset on the cradle.Note:L You can also dial the phone number after liftingthe corded handset.Using the speakerphone1 During a conversation with the cordedhandset, press {SP-PHONE} to turn on thespeakerphone.L You can place the corded handset on thecradle.L Speak into the base unit microphone.L Speak alternately with the other party.2 When you finish talking, press {SP-PHONE}.Note:L For best performance, use the speakerphone ina quiet environment.L To switch to the receiver, lift the corded handset.Using the handset Y1 Lift the handset and dial the phone number.L To correct a digit, press {CLEAR}.2 {C}3 When you finish talking, press {OFF} or placethe handset on the charger.Using the speakerphone1 During a conversation, press {s} to turn onthe speakerphone.L Speak alternately with the other party.2 When you finish talking, press {OFF}.Note:L For best performance, use the speakerphone ina quiet environment.L To switch to the receiver, press {C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialed are stored in theredial list in each unit (each 48 digits max.).1 {REDIAL}2 {V}/{^}: Select the desired phone number.3 Proceed with the operation for your unit.Base unit: Lift the corded handset.Handset: {C}Erasing a number in the redial list1 {REDIAL}2 {V}/{^}: Select the desired phone number.i {ERASE} (soft key)3 {V}/{^}: “Yes” i {SELECT}4 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Pause (for PBX/long distance serviceusers)A pause is sometimes required when making callsusing a PBX or long distance service. Whenstoring a calling card access number and/or PIN inthe phonebook, a pause is also needed (page 18).Example: If you need to dial the line accessnumber “9” when making outside calls with a PBX:1 {9} i {PAUSE}2 Dial the phone number.3 Proceed with the operation for your unit.Base unit: Lift the corded handset.Handset: {C}Note:L A 3.5 second pause is inserted each time{PAUSE} is pressed. Repeat as needed tocreate longer pauses.= Base unit / Y Handset= Base unit / Y Handset= Base unit / Y HandsetTG106xC(e).book Page 13 Wednesday, February 25, 2009 11:13 AM