Panasonic KX-TG1061C Operating Instructions Manual

Call Display Service29Editing a caller’s phone numberbefore calling backYou can edit a phone number in the caller list byadding the long distance code “1” or removing itsarea code.1 Proceed with the operation for your unit.Base unit: {CID}Handset: {MENU} i {V}/{^}: “Callerlist” i {SELECT}2 {V}/{^}: Select the desired entry.3 Press {EDIT} repeatedly until the phonenumber is shown in the desired format.4 Proceed with the operation for your unit.Base unit: Lift the corded handset.Handset: {C}Note:L The number edited in step 3 will not be saved inthe caller list.Erasing selected caller information1 Proceed with the operation for your unit.Base unit: {CID}Handset: {MENU} i {V}/{^}: “Callerlist” i {SELECT}2 {V}/{^}: Select the desired entry.3 {ERASE} (soft key) i {V}/{^}: “Yes” i{SELECT}4 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Erasing all caller information1 Proceed with the operation for your unit.Base unit: {CID}Handset: {MENU} i {V}/{^}: “Callerlist” i {SELECT}2 {ERASE} (soft key) i {V}/{^}: “Yes” i{SELECT}3 Proceed with the operation for your unit.Base unit: {■} (EXIT)Handset: {OFF}Storing caller information in thephonebook1 Proceed with the operation for your unit.Base unit: {CID}Handset: {MENU} i {V}/{^}: “Callerlist” i {SELECT}2 {V}/{^}: Select the desired entry.L To edit the number, press {EDIT} repeatedlyuntil the phone number is shown in thedesired format.3 {SAVE}4 {V}/{^}: “Phonebook” i {SELECT}5 Continue from step 2, “Editing entries”, page17.= Base unit / Y Handset1 1 – Area code – Local phone numberExample:2 Local phone numberExample:3 Area code – Local phone numberExample:= Base unit / Y Handset1-555-321-5555321-5555555-321-5555= Base unit / Y Handset= Base unit / Y HandsetTG106xC(e).book Page 29 Wednesday, February 25, 2009 11:13 AM