2.3 Subscriber Features2.3.1 Auto ReceiptDescriptionAllows a subscriber or the System Manager to receive a message to confirm the reception of sent messages.When the sent messages are received by a subscriber, the sender will receive a message announcing"(mailbox name/number) has received your message". Subscribers need to request the Auto Receipt whenthey send messages.Conditions• This feature is only available when the Class of Service’s "Auto Receipt" parameter is set to "Yes".• This feature is not available when the System Manager sends a Broadcasting Message.• The reception of External Delivery Messages can be confirmed using this feature as well. Subscribers canrequest an Auto Receipt when sending a message to a single recipient or to all members of an ExternalDelivery Message List, and receive an Auto Receipt for each member in the list.Programming Manual References"Auto Receipt" in 2.2.2 Personal Options2.3.2 Automatic Login (APT/DPT Integration Only)DescriptionAllows subscribers to log in to their mailbox directly without entering the mailbox number. A subscriber can login to his or her mailbox directly by:– dialling an extension number of the VPS from his or her extension– calling the VPS from a telephone number that is assigned to log him or her into the mailbox– dialling (from an outside telephone) the DID number assigned to log him or her into the mailbox– calling the VPS so that the call is received on the trunk assigned to log him or her into the mailboxConditions• This feature can be enabled or disabled for each mailbox by the System Administrator.• Access from outside telephones will be enabled automatically after a Caller ID number, DID number, ortrunk number is assigned. A trunk number or DID number can be assigned by the System Administratoronly.• When this feature is activated, "Toll Saver" is also available.• DID number setting for this feature is only available for the following PBXs using DPT Integration.– KX-TD500: Software production date code 040901 or later.(KX-TD500C: Q951AB or higher, KX-TD500RU: Q971AB or higher, all other: Q271AD or higher)– KX-TDE series– KX-TDA series (MPR version 1.1 or higher)Programming Manual References2.1.10 Automatic LoginDocument Version 2.1 2008/04 Feature Manual 352.3.2 Automatic Login (APT/DPT Integration Only)