Panasonic MINAS-BL GP series Instructions Manual

Also see for MINAS-BL GP series: Technical instructions Technical instructions Manual

Contents

－ 93 －－ 92 －Configuration of peripheral equipmentPowersupply・100 V system: Single phase 100 V to 120 V ± 10%, 50/60 Hz200 V system: Single phase 200 V to 240 V ± 10%, 50/60 Hz・Use the equipment under the environment of overvoltage category II specifiedby IEC60664-1.・In order to obtain overvoltage category III, insert a transformer conforming toEN standard or IEC standard to the input of brushless motor.・Use an electric wire size suitable to EN60204-1.MCCB(breaker)FuseBe sure to connect the specified Molded Case Circuit Breaker (MCCB) certifiedby IEC and UL, or fuse certified by UL, between power supply and noise filterso that symmetrical current upon short-circuiting of power source will notexceed 5000 Arms. Meeting this condition allows conformance with UL508C (fileNo. E164620) and UL1004 (file No. E166557).NoisefilterWhen installing one noise filter at the power supply for more than onebrushless motor used, contact the manufacturer of noise filter.SurgeabsorberInstall a surge absorber on the primary side of noise filter. However, inperforming the voltage resistance test of machine and equipment, be sure toremove the surge absorber; otherwise, the surge absorber may be ruptured.GroundingBe sure to connect the grounding Terminal of brushless amplifier and protectivegrounding wire (PE) of system for preventing electric shock. Do not tighten thegrounding wires together but connect them individually.Wiring of peripheral equipmentMolded CaseCircuit Breaker(MCCB)or FuseBrushlessamplifierBrushlessmotorSurgeabsorberNoise filterProtection ground(PE)groundPowersupplyFerrite core (Noise filter for signal line)option DV0P1460 (*Qty. 4 ) (part No.: ZCAT3035-1330/TDK Corp.)* The ferrite core should insert oneor more pieces in an electric wire,respectively.Conformance to EC directive and UL standard• DV0P4170 • DV0PM20042LabelTerminal cover(transparent)2 ø4.52 ø4.5×6.7553.1±1.0100.0±2.088.075.0 5.012.010.050.060.07.02.011.613.06-M4Label11510595 5.510437052Earth terminalM4M4Screwfor coverM3CoverBody[Unit: mm]List of compatible peripheral equipmentPart name Optional partsnumber (option)Manufacturer'sparts number Qty. ManufacturerNoise filter(single phase 100, 200 V) DV0P4170 SUP-EK5-ER-6 1Okaya ElectricIndustries Co. Ltd.Noise filter(3-phase) DV0PM20042 3SUP-HU10-ER-6 1Surge absorber(single phase 100, 200 V) DV0P4190 R・A・V-781BWZ-4 1Surge absorber(3-phase) DV0P1450 R・A・V-781BXZ-4 1Noise filter for control signals DV0P1460 ZCAT3035-1330 4 TDK CorporationNoise filter