About This ManualUsing This ManualPanasonic Semiconductor Development Company MN102H75K/F75K/85K/F85K LSI User Manual16PanasonicAbout This ManualThis manual is intended for assembly-language programming engineers. Itdescribes the internal configuration and hardware functions of the MN102H75Kand MN102H85K microcontrollers. Except when discusssiing differing specifi-cations,this manual refers to the two microcontrollers as a single device :MN102H75K/85K.Using This ManualThe chapters in this manual deal with the internal blocks of the MN102H75K/85K. Chapters 1 to 5 provide an overview of the MN102H75K/85K’s generalspecifications, interrupts, power modes, timers, and serial connections. Chapters6 to 10 describe the on-screen display and other specialized functions availablewith the MN102H75K/85K. Chapter 11 provides the I/O port specifications,chapter 12 describes the ROM correction feature, chapter 13 describes the I 2Cinterface, and chapter 14 describes the H scan line counter. Appendix A providesa register map, and Appendix B describes the flash EEPROM version.Text ConventionsWhere applicable, this manual provides special notes and warnings. Helpful orsupplementary comments appear in the sidebar. In addition, the followingsymbols indicate key information and warnings:Register ConventionsThis manual presents 8- and 16-bit registers in the following format:REGISTER: Register Name x’000000’The hexadecimal value (x’000000’) indicates the register address. The top row ofthe register diagram holds the bit numbers. Bit 15 is the most significant bit(MSB). The second row holds the bit or field names. A dash (—) indicates areserved bit. The third row shows the reset values, and the fourth row shows theaccessibility. (R = read only, W = write only, and R/W = readable/writable.)Key informationThese notes summarize key points relating to an operation.WarningPlease read and follow these instructions to prevent damage orreduced performance.Bit: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0— — — BitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameBitNameReset: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0R/W: R R R R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
