MN102HF75K Flash EEPROM VersionUsing the Onboard Serial Programming ModeMN102H75K/F75K/85K/F85K LSI User Manual Panasonic Semiconductor Development Company319PanasonicB.4 Using the Onboard Serial ProgrammingModeThe serial programming mode is primarily used to program the flash ROM indevices that are already installed on a PCB board. Panasonic provides the ded-icated hardware and software for this mode. This section describes the microcon-troller hardware, system configuration, software register map, and protocol forthis type of programming operation.n Hardware requirements:© Onboard serial writer (YDC model AF200 (provisional))© Add-on circuit for target board© Flash programming connectors or pins for target boardn Software requirements:© Serial writer load program, installed in first kilobyte of MN102HF75K/85K EEPROM© Programming algorithm for operating the onboard serial writerFigure B-4 Serial Writer Programming ConfigurationOnboard serial writerSerial communication16-bit microcontrollerwith flash EEPROMProgramfor TVTelevision set
