Panasonic NV-GS50EN Operating Instructions Manual

Also see for NV-GS50EN: Service manual Service manual Service manual

Contents

Others-118-z: Outdoor Mode -88-{: Indoor Mode (recordingunder incandescentlamp) -88-C.NIGHT VIEW:Colour Night ViewFunction -86-0LUX NIGHT VIEW:0 Lux Night ViewFunction -86-Z.MIC: Zoom Microphone -84-WIND CUT: Wind Noise Reduction-87-æ: Progressive PhotoshotMode -83-PICTURE: Picture -107-TITLE: Title picture -111-MPEG4: Moving Picture(MPEG4) -107-VOICE: Voice data -107-0h00m00s: Recording time ofMPEG4 or Voice dataVOLUME: Volume adjustment -94-15:30:45: Date/Time Indication-119-N (F, E): Card Photoshot PictureQuality (during CardPhotoshot recording)[F] means Fine, [N]means Normal and [E]means Economy. -104-, , : MPEG4 Picture Quality-106-ACCESS: While Card is being read(during Playback,Formatting andMulti-Picture Functionuse). -103-0: Remaining Number ofCard Photoshot pictures-104-R:0h00m: Remaining time ofMPEG4 or Voice dataH, L: Card ContinuousPhotoshot Recording-104-: Lock Setting -113-¥ (White): DPOF Settingcompleted (set to 1 ormore picture) -112-¥ (Green): Slide Show Settingscompleted -110-¥ (Blue): DPOF Setting (set to1 or more picture)/SlideShow Settings bothcompleted -110-, -112-N F SF: [640k480] Image size≥For images not recorded with thisMovie Camera, the size display isdetermined as follows according to thenumber of horizontal pixels.: 640 or more, less than800 (The size is notdisplayed at under640 pixels.): 800 or more, less than1024: 1024 or more, less than1280: 1280 or more, less than1600: 1600 or more, less than2048: 2048 or more(Cyan): Card Photoshot Mode(Red): While Card Photoshotrecording is activated(Red): No Card (Still PictureMode)(Cyan): Moving Picture(MPEG4) Recording(Red): While Moving Picture(MPEG4) recording isactivated(Red): No Card (MPEG4 Mode)(Cyan): Voice Recording Mode(Red): While Voice Recordingis activated(Red): No Card (VoiceRecording Mode)ª To Change the Counter DisplayModeBy changing [C.DISPLAY] on the[DISPLAY SETUP] Sub-Menu, you canchange the Counter Display Mode toTape Counter Indication [COUNTER](0:00.00), Memory Counter Indication[MEMORY] (M0:00.00), and Time CodeIndication [TIMECODE] (0h00m00s00f).(-78-) By repeatedly pressing the[COUNTER] Button on the RemoteController, you can change the CounterDisplay Mode.640640SVGAXGASXGAUXGAQXGAPICTUREPICTUREPICTUREMPEG4MPEG4MPEG4VOICEVOICEVOICE