Panasonic NV-GS50EN Operating Instructions Manual

Also see for NV-GS50EN: Service manual Service manual Service manual

Contents

Others-125-Multi-Picture Mode (VCR Mode)≥The quality of Multi images deterioratesslightly.≥Playback Multi-Mode screens cannotbe output through the DV Terminal(-69-).≥If there is input from DV Terminal, amulti screen cannot be created.≥When signals are input from S-VideoInput/Output Socket or Audio-VideoInput/Output Socket, a Multi Screencannot be re-displayed.≥Signals input from S-VideoInput/Output Socket or Audio-VideoInput/Output Socket cannot bedisplayed on a Multi Screen.≥If you switch the Movie Camera fromthe Index Multi-Picture Mode over tothe Camera Mode, the setting of[SCAN MODE] on the[MULTI-PICTURES] Sub-Menu of the[CAMERA FUNCTIONS] Main-Menu isautomatically set to [STROBE].ª Playing Back on Your TV≥If you set [AV JACK] on the[AV IN/OUT SETUP] Sub-Menu to[IN/OUT], nothing will be shown on theTV screen except during playback.≥Picture size may be displayeddifferently when playing back a Cinemapicture on a wide-screen TV with [B/W]or [SEPIA] of Playback Digital Effect.ª Audio Dubbing≥The blank section of a tape cannot bedubbed.≥Sounds sent through the DV Terminalcannot be dubbed.≥If a tape has a non-recorded portionwhen the tape is dubbed, images andsounds may be disturbed when thisportion of the tape is played back.≥If you set the tape counter back to 0 atthe position where you want to stopAudio Dubbing so as to make itpossible to use the Memory StopFunction (-136-), Audio Dubbing isterminated automatically when the tapereaches this position.≥In the case of importing data recordedwith Audio Dubbing to a PC using thePC’s software programme, only theoriginal sound (ST1) may be imported,depending on the software programme.ª Recording the Contents ofOther EquipmentRecording to a CardIf you set the[TAPE/CARD/CARD MODE] Selector to[CARD], you can use the Card Photoshotfunction for external input signals.≥Black streaks may appear at the4 edges of the image.≥If the [VOICE] Indication is displayed,recording to a Card is not possible.Analog-Digital Conversion≥When the Movie Camera is connectedwith other digital video equipmentthrough its DV Terminal, imagesrecorded in analog form from otherexternal equipment can be output tothe digital video equipment through theDV Terminal.≥To DV-output analog video signals sentfrom other equipment, set [DV OUT] onthe [AV IN/OUT SETUP] Sub-Menu to[ON]. (Normally, keep the [DV OUT] setto [OFF]. If it is set to [ON], the qualityof the image may be disturbed.)ª Using the DV Cable forRecording(Digital Dubbing)≥Regardless of the setting, digitaldubbing is carried out automatically inthe same audio recording mode as thatof the Cassette on the playback-side.≥The images on the monitor of therecording side may be disturbed, but itdoes not affect the recorded images.≥Even if Playback Digital Effects,Playback Zoom, or Playback Title Inhave been used, these effects are notoutput from the DV Terminal.≥Even if you use device equipped withDV Terminals (such as IEEE1394), youmay not be able to perform DigitalDubbing in some cases.≥Date or other information to bedisplayed cannot be displayed if thesoftware of the connected equipmentdoes not support the display function.