Before Use-75-Turning on the Movie Cameraand Selecting ModesTurn on the power first and then selectmodes.ª How to Turn on the Power1 Set the [OFF/ON/MODE] Switch (43)to [ON] while pressing the button1.≥The [CAMERA] Lamp (45) lights up.ª How to Switch Modes2 Rotate the [OFF/ON/MODE] Switch(43).≥With each rotate, the Mode changes.≥The appropriate Mode Lamp lightsup.ª How to Turn off the Power3 Set the [OFF/ON/MODE] Switch (43)to [OFF] while pressing the button1.Using the Viewfinder/LCDMonitorª Using the ViewfinderBefore using the Viewfinder, adjust thefield of view so that the displays insidethe Viewfinder become clear and easy toread.1 Pull the Viewfinder.CAMERAVCRCARDPBOFFONMODE1(43)(45)OFFONMODE(43)OFFONMODE(43)12 Adjust by turning the EyepieceCorrector Knob (37).ª Using the LCD MonitorWith the LCD Monitor open, you can alsorecord the picture while watching it.1 Put a finger on the [OPEN4] Knob(1) and pull the LCD Monitor (2) outabout 90o in the direction of thearrow.≥The Viewfinder goes off.2 Adjust the LCD Monitor angleaccording to the desired recordingangle.≥The LCD Monitor can rotate amaximum of 180o 1 from the verticalposition to the upward direction anda maximum of 90o 2 to thedownward direction. Forcefullyrotating the LCD Monitor beyondthese ranges will damage the MovieCamera.Closing the LCD MonitorPush the LCD Monitor until it is securelylocked.≥Make sure the Card Slot Cover isclosed.12:30:4515.10.200312:30:4515.10.200312:30:4515.10.200312:30:4515.10.2003(37)(2)(1)290o1180o