Panasonic NV-GS50EN Operating Instructions Manual

Also see for NV-GS50EN: Service manual Service manual Service manual

Contents

Others-134-Playback (Pictures)1: Pictures cannot be played backeven when the [1] Button ispressed.0 Is the [VCR] Lamp on? If the [VCR]Lamp is not on, the playback functioncannot be used. (-94-)2: Mosaic-pattern noise appears onimages during Cue, Review or SlowMotion Playback.• This phenomenon is characteristic ofdigital video systems. It is not amalfunction.3: Although the Movie Camera iscorrectly connected to a TV,playback images cannot be seen.• Have you selected “Video Input” onthe TV? Please read the operatinginstructions of your TV and select thechannel that matches the inputsockets used for the connection.4: Playback picture is not clear.• Are the heads of the Movie Cameradirty? If the heads are dirty, playbackimage cannot be clear. (-130-)Playback (Sound)1: Sound is not played back from thebuilt-in speaker of the MovieCamera or the headphones.0 Is the volume too low? Duringplayback, keep pressing the [PUSH]Dial until the [VOLUME] Indicationappears. Then, turn the [PUSH] Dial toadjust the volume. (-94-)2: Different sounds are reproduced atthe same time.• [12bit AUDIO] on the[PLAYBACK FUNCTIONS] Sub-Menuof the [VCR FUNCTIONS] Main-Menuhas been set to [MIX]. As a result, theoriginal sound and sound that wasrecorded by audio dubbing are playedback together. It is possible toreproduce the sounds separately.(-100-)3: The original sound was erasedwhen audio dubbing wasperformed.• If you perform audio dubbing on arecording done in [16bit] Mode, theoriginal sound will be erased. If youwish to preserve the original sound, besure to select [12bit] Mode at the timeof recording.4: Sounds cannot be played back.• Although a Cassette with no audiodubbing is being played, is[12bit AUDIO] on the[PLAYBACK FUNCTIONS] Sub-Menuof the [VCR FUNCTIONS] Main-Menuset to [ST2]? To play back a Cassettewith no audio dubbing, [12bit AUDIO]must be set to [ST1]. (-100-)• Is the Variable Speed Search Functionworking? Press the [1] Button tocancel the Variable Speed SearchFunction. (-95-)Card1: Recorded pictures are not clear.0 Is [PICTURE QUALITY] on the[CARD SETUP] Sub-Menu set to[NORMAL] or [ECONOMY]? Ifrecording is done with it set to[NORMAL] or [ECONOMY], imageswith fine details may include amosaic-like pattern. Set[PICTURE QUALITY] to [FINE]. (-104-)2: Card Photoshot Playback imagesdo not look normal.• The picture may be damaged. In orderto prevent the loss of image data,backing up on a Cassette or apersonal computer is recommended.(-108-, -115-)3: During Playback the [k] Indicationis displayed.• The image was either recorded in adifferent format, or data is damaged.4: Even if a Card is formatted, itcannot be used.• Either the Movie Camera or the Cardmay be damaged. Please consult adealer.Others1: The Free Style Remote Controllerwith Mic does not operate correctly.• If it is not plugged in tightly, it will notoperate correctly.2: The Movie Camera clatters whenshaking it.• It is a sound of the lens moving, not amalfunction.3: When the USB Cable isdisconnected, an error messagewill appear.• To disconnect the USB cable safely,double-click the [ ] icon in the tasktray and follow the instructions on thescreen. (-115-)