Panasonic NV-GS50EN Operating Instructions Manual

Also see for NV-GS50EN: Service manual Service manual Service manual

Contents

Camera Mode-88-To Cancel the Programme AEFunctionSet the [AUTO/MANUAL/FOCUS]Switch to [AUTO]. Or, set the[PROG.AE] on the [CAMERA SETUP]Sub-menu to [OFF].≥For other notes concerning this item,see -122-.Recording in Natural Colours(White Balance)Depending on the scene or lightcondition, the Automatic White BalanceAdjustment Mode may not be able tobring out natural colours. In such a case,the white balance can be adjustedmanually.When the Movie Camera is turned onwith the Lens Cap on, the AutomaticWhite Balance Adjustment may notfunction properly. Please turn on theMovie Camera after removing the LensCap.1 Set the [AUTO/MANUAL/FOCUS]Switch (47) to [MANUAL].≥The [MNL] Indication appears.2 Press the [PUSH] Dial (38).≥The [AWB] Indication appears.3 Turn the [PUSH] Dial (38) to set adesired White Balance Mode.1) Automatic White BalanceAdjustment [AWB]2) The white balance setting that waspreviously set manually [1]3) Outdoor Mode [z]4) Indoor Mode (recording underincandescent lamp) [{]AUTOMANUALFOCUS(47)PUSHMF/VOL/JOGWB/SHUTTER/IRIS/(38)1111AWB1)3)2)4)To Resume Automatic AdjustmentTurn the [PUSH] Dial until the [AWB]Indication appears. Or, set the[AUTO/MANUAL/FOCUS] Switch to[AUTO].Adjusting White BalanceManuallyWhite Balance Adjustment recognizesthe colour of light and makes adjustmentso that the white colour will become purewhite. The Movie Camera determinesthe hue of light that it receives throughthe Lens and White Balance Sensor,thereby judging the recording condition,and selects the closest hue setting. Thisfunction is called Automatic WhiteBalance Adjustment.For light outside the functional AutoWhite Balance Adjustment range, usethe Manual White Balance AdjustmentMode.1 Set the [AUTO/MANUAL/FOCUS]Switch (47) to [MANUAL].≥The [MNL] Indication appears.2 Point the Movie Camera at afull-screen white subject.3 Press the [PUSH] Dial (38).≥The [AWB] Indication appears.4 Turn the [PUSH] Dial (38) until the[1] Indication is displayed.5 Keep pressing [PUSH] Dial (38)until the [1] Indication stopsflashing.To Resume Automatic AdjustmentTurn the [PUSH] Dial until the [AWB]Indication is displayed. Or, set the[AUTO/MANUAL/FOCUS] Switch to[AUTO].AUTOMANUALFOCUS(47)PUSHMF/VOL/JOGWB/SHUTTER/IRIS/(38)MNL1